Description
TCI Pro Flat 22 Constant Current LED Driver 22W 22W
- Multipower driver supplied with dip-switch for the selection of the output current
- Driver for built-in use
- Can be used for lighting equipment in protection class I and II.
- Active Power Factor Corrector
- Current regulation ±5 % including temperature variations
- Input and output terminal blocks on opposite sides (wire cross-section up to 1,5 mm² / AWG15)
- Clamping screws on primary and secondary circuits for cables with diameter: min. 3 mm – max. 10 mm
- Driver can be secured with slot for screws
- Protections:
- Against overheating and short circuits
- Against mains voltage spikes
- Against overloads
- Thermal protection = C.5.a
Rated Voltage | 220-240 V |
---|---|
Power | 5.5-22W |
Dimming | Not Dimmable |
Additional technical features | Ripple Free Active PFC (pf>0.9) SELV <> |
Approvals | KEMAKEUR ENEC CCC RCM CE EAC UKCA |
Plastic case | Slim IP 20 (Independent Use) |
Minimum cut-out hole diameter | 50 mm |
Size | 146 x 22 x 43 mm |
Comments
There are no comments yet.