Safe Plates Archives

Safe plates, also known as cable outlet plates or grommet plates, are electrical accessories used in the UK and other countries for cable protection and organization in electrical installations. They are typically installed in walls, ceilings, or floors and serve several purposes, including protecting cables from damage, preventing ingress of dust and debris, and maintaining fire resistance in fire-rated structures. Here’s an overview of safe plates and their use in electrical installations in the UK:

Purpose and Use:

Cable Protection: Safe plates are primarily designed to protect electrical cables and wiring as they pass through walls, floors, or ceilings. They provide a secure and safe path for cables, preventing them from being damaged by sharp edges or rough surfaces.
Fire Protection: In fire-rated structures, safe plates are used to maintain the fire resistance of the wall or ceiling. Fire-rated safe plates are designed to seal the penetration and prevent the spread of flames and smoke in the event of a fire, preserving the building’s fire safety rating.
Dust and Debris Prevention: Safe plates also help prevent the ingress of dust, dirt, and debris into the building through cable openings. This is especially important in clean environments, such as healthcare facilities or laboratories.

Types of Safe Plates:

Standard Safe Plates: These are used primarily for cable protection and are commonly found in residential and commercial installations. They are typically made of plastic or metal and are available in various sizes to accommodate different cable diameters.
Fire-Rated Safe Plates: Fire-rated safe plates are designed to maintain the fire resistance of walls and ceilings. They are constructed with fire-resistant materials and are tested to withstand fire for a specified duration, ensuring that they do not compromise the building’s fire safety.

Installation:

Safe plates are relatively easy to install and typically require a few basic steps:

Cut Opening: Cut an opening in the wall, ceiling, or floor where the cables will pass through. Ensure that the opening is appropriately sized and located to accommodate the cables.
Insert Safe Plate: Place the safe plate into the opening, ensuring a snug fit. Secure it in place using screws or other fasteners provided by the manufacturer.
Sealing: In the case of fire-rated safe plates, it’s essential to seal any gaps around the plate with fire-resistant sealant or intumescent material to maintain the fire rating.
Cable Pass-Through: Pass the electrical cables through the safe plate, ensuring they are adequately protected and organized.
Finishing: Finish the installation by patching and painting the surrounding area as needed to blend it with the wall, ceiling, or floor.

Compliance with Regulations:

When using safe plates in electrical installations in the UK, it’s crucial to ensure that they comply with relevant electrical regulations and standards, such as the 18th Edition of the Wiring Regulations (BS 7671:2018) and any specific fire safety regulations applicable to your project. Additionally, safe plates should be installed by qualified electricians or professionals familiar with the relevant standards to ensure proper installation and compliance with safety codes.

Warmup Repair Kit (New 2019)

Warmup 6iE Smart WiFi Underfloor Heating Thermostat Onyx Black

Warmup 6iE Smart WiFi Underfloor Heating Thermostat White

Pebble Mini Plug&Play Hand Dryer - Black

Hafele Loox LED Door Sensor Switch

Timeguard Fused Spur 7 Day FST77

GEFL - Ceiling Mounted PIR Presence Detector

GITLC 2 Wire Push Button Time Lag Switch

Aurora EN-DLM981X EFD™ Pro Fixed Fire Rated Downlight

G4 LED 3W Dimmable 3000K Warm White

Aurora AU-X7/30 7W LED Warm White 3000K Dimmable Downlight White Bezel Included

G4 LED 2W Dimmable 3000K Warm White

DC Jolly MD Driver 122260 Dimmable LED Driver

DC MAXI Jolly DALI 1 & 2 / 1-10V 60W Dimmable LED Driver 127413

Aurora 1-10W Dimmable 700mA Constant Current LED Driver

1-4W 350mA Dimmable Constant Current LED Driver

Hager Sollysta 2 Gang Double Pole Switched Socket Dual Earth

Syncbox SB-Power

Hager Sollysta Double Pole Switched Socket 2 Gang With Twin USB A+C Ports

V-Pro Grid - Long Spindle 24mm LED Dimmer 120W

FuseBox 32A RCBO Type A

FuseBox 6A RCBO Type A

Meter Supply Isolator with Surge Protection

Fusebox Din Rail Mounted MCB / RCBO Blank

Aico Ei146e Optical Smoke Alarm

Aico Ei3016 Optical Smoke Alarm

Aico Ei650RF RadioLINK+ Battery Optical Alarm

Aico Ei3018 Carbon Monoxide Alarm

Vent-Axia VASF100HT Dual Speed Silent Humidistat Timer

Vent Axia VASF100T Dual Speed Silent with Timer

Envirovent SILDES100HT Silent Design 100mm White Ultra Quiet Extractor Fan With Timer & Humidistat

AirVent Tile Fan with Timer

NAPIT EICR Codebreakers A2:2022

Requirements for Electrical Installations IET Wiring Regulations Eighteenth Edition BS 7671:2018+A2:2022

Guidance Note 3: Inspection & Testing 9th Edition

On-Site Guide (BS 7671:2018+A2:2022) 8th Edition

Wago Wagobox 221-4 Enclosure 4mm²

Wagobox-Light Wago Junction Box

Wago 221-412 2 Way Lever Connector - Pack of 100

Wago Junction Box

M6 X 20mm Penny Washer BZP

SWA No. 7 Cable Cleat

Deligo M6 x 30mm Penny Washer BZP

25mm Steel Spacer Bar Saddles White

Milwaukee Inkzall™ Marker Black - 1 PC

Ideal Flat Cable Stripper for Twin & Earth

Mandrex One-Click (MXqs) Hole Extension Adapter Set

FuseBox Consumer Unit Lock Kit

POD POINT S7-2C-3 Solo 3 Tethered 7kW EV Car Charger

POD POINT SOLO LOCKING MECHANISM

Pod Point Solo 3 Home Untethered Universal 7kW Mode 3 EV Charger

Sync EV - Home Car Charger EVCP-7KW-S-1PH: 32A Black

Sync EV - Home Car Charger EVCP-7KW-S-1PH: 32A White

G4 LED 3W Dimmable 3000K Warm White

Live Electrical 125 Amp 6 Way TPN Distribution Board with SPD

Pebble Mini Plug&Play Hand Dryer - Black

Aurora R6™ Fixed 6W Fire Rated Downlight Warm White 3000K

The Back Box Repair Clip - Pack of 5

Safe Plates

Fixings

Ideas & Inspiration