SunStone 150W/m Matt – 1.5m2
The self-adhesive PVC heating mat system is low-build and suitable for tile and stone floors.
Operating Voltage: 220 ~ 240V: 50Hz
Mat width: 500mm
Mat thickness: 5mm
Outer Wire Insulation: PVC
Wattage density: 150W/m2 or 200W/m2
The cable in a SunStone Mat system is very similar to the cable found in a Loose Wire System.
However, in this case, the cable is pre-fixed to a glass-fibre mesh providing the perfect spacing between each line of cable.
The fact that the cable is already perfectly spaced means that the SunStone Mat is extremely easy and quick to install,
simply unroll the mat in a straight line until you reach the wall or unit on the other side of the room, cut the mat (not the cable), rotate the roll, and roll back up in the other direction.
This process is to be repeated until the room is covered. This design reduces the time required to install the heater by 35%.
The SunStone Mat can be installed in rooms with high levels of heat-loss such as conservatories and can be used as either a primary or secondary heat-source within the home.