ALL LED AGLH035WH/30 Halo LED Marker Light 3000K
The ALL LED AGLH035WH/30 Halo LED Marker Light 3000K is a compact 1W recessed in-ground lighting fitting designed for subtle architectural and landscape illumination. With its warm white output, contemporary Polar White finish and IP65 protection, it provides a discreet lighting solution for suitable garden features, entrance areas and decorative outdoor installations.
Featuring flush anti-glare optics and toughened construction, this Halo marker light is designed to integrate neatly into surrounding surfaces. Its 3000K illumination creates a welcoming atmosphere while maintaining a compact appearance, making it particularly attractive for residential gardens and professionally planned architectural lighting.
Key Features – Halo 3000K LED Marker Light
- 1W energy-efficient recessed LED marker light
- 3000K warm white illumination
- Contemporary Polar White finish
- IP65 protection against dust and water jets
- Flush anti-glare optics for comfortable low-level illumination
- Toughened optical design for suitable recessed applications
- Designed for in-ground architectural marker lighting
- Suitable for appropriately assessed garden and landscape installations
- 350mA constant current operation
- Dimmable using a compatible dimmable LED driver
- Supplied with a 1-metre pre-wired cable
- Requires a separate 350mA constant current driver
- Multiple fittings must be connected in series
3000K Warm White Lighting for Gardens and Outdoor Features
The Halo 3000K marker light provides a warm white lighting effect suited to decorative landscape installations and architectural features.
Its colour temperature complements natural stone, timber, brickwork and traditional garden materials, making it particularly attractive where outdoor lighting should create a welcoming rather than clinical appearance.
Compared with the cooler 4000K version, the 3000K Halo produces a softer visual atmosphere, making it suitable for residential entrance features, landscaped garden areas and decorative ground-level lighting schemes.
Flush Anti-Glare Optics and Polar White Finish
The ALL LED AGLH035WH/30 Halo LED Marker Light 3000K incorporates a flush optical design intended to integrate discreetly into suitable recessed surfaces.
Its anti-glare optics help reduce direct visual discomfort, allowing decorative lighting to complement the surrounding architecture without producing an unnecessarily harsh lighting effect.
The Polar White finish works particularly well with light-coloured paving, pale stone surfaces and contemporary architectural details.
Technical Specifications
| Manufacturer | ALL LED |
|---|---|
| Product Code | AGLH035WH/30 |
| Product Range | Halo |
| Product Type | Recessed In-Ground LED Marker Light |
| Rated Power | 1W |
| Operating Current | 350mA Constant Current |
| Colour Temperature | 3000K Warm White |
| Finish | Polar White |
| Optics | Flush Anti-Glare Design |
| Ingress Protection | IP65 |
| Mounting | Recessed In-Ground |
| Pre-Wired Cable | 1 Metre |
| Dimmable | With Compatible Dimmable Driver |
| LED Driver | Required – Sold Separately |
| Multiple Fitting Connection | Series Wiring |
Recessed In-Ground Marker Lighting
The ALL LED Halo range is designed for decorative in-ground installations where compact marker lights can provide subtle illumination around architectural and landscape features.
Multiple fittings may be arranged at suitable intervals to create coordinated warm white lighting effects around building entrances, landscaped areas and appropriate pathway edges.
The IP65 rating provides protection against dust and water jets. However, the fitting’s suitability for a particular ground installation depends on mounting conditions, drainage arrangements and the manufacturer’s instructions.
IP65 protection does not automatically establish suitability for standing water, continuous immersion or vehicle loading. These conditions must be assessed separately before installation.
Installation and 350mA Constant Current Requirements
The Halo LED marker light is supplied with a factory-fitted 1-metre cable to assist with connection to a compatible constant current LED driver.
Before installation, electricians should verify the mounting dimensions, available recess depth, drainage arrangements, cable routes and driver accessibility.
This fitting operates at 350mA constant current and must never be connected directly to a 230V mains supply.
ALL LED 350mA Constant Current Driver Options
The ALL LED AGLH035WH/30 Halo LED Marker Light 3000K requires a suitable 350mA constant current LED driver, which is sold separately.
Correct driver selection depends on the number of connected fittings, their combined forward voltage, the driver’s permitted operating range and whether dimming functionality is required.
Electrical4Less offers the following ALL LED driver options for consideration, subject to confirmation of electrical compatibility:
- ALL LED ADRCC350/1-11 – 1–11W non-dimmable 350mA constant current driver.
- ALL LED ADRCC350TD/1-4 – 1–4W dimmable 350mA driver.
- ALL LED ADRCC350ANOTD/2-4 – 2–4W dimmable 350mA Nano driver.
- ALL LED ADRCC350TD/4-9 – 4–9W dimmable 350mA driver.
- ALL LED ADRCC350TD/9-18 – 9–18W dimmable 350mA driver.
- ALL LED ADRCC350TD/12-25 – 12–25W dimmable 350mA driver.
- ALL LED ADRCC12D/100-440MA – Adjustable 12W constant current driver with DALI and 1–10V dimming. Must be configured to 350mA.
- ALL LED ADRCC30D/300-900MA – Adjustable 30W constant current driver with DALI and 1–10V dimming. Must be configured to 350mA.
Browse our ALL LED 350mA mains dimmable LED drivers for additional options.
Important: A driver’s stated wattage range alone does not guarantee compatibility. Always verify its output voltage range, minimum and maximum loads, and the combined forward voltage of the connected fittings.
IMPORTANT INSTALLATION INSTRUCTIONS – SERIES WIRING ONLY
WARNING: INCORRECT CONNECTIONS WILL DAMAGE THE LED FITTINGS!
The ALL LED AGLH035WH/30 Halo LED Marker Light 3000K operates at 350mA CONSTANT CURRENT and must be connected to a correctly specified constant current LED driver.
MULTIPLE LED FITTINGS MUST BE CONNECTED IN SERIES – NEVER IN PARALLEL.
- Connect the positive (+) output of the LED driver to the positive (+) connection of the first LED fitting.
- Connect the negative (-) connection of the first fitting to the positive (+) connection of the next fitting.
- Continue connecting additional LED fittings using the same series arrangement.
- Connect the negative (-) connection of the final fitting to the negative (-) output of the driver.
- Never connect these fittings directly to a 230V mains supply.
- Never connect or disconnect LED fittings while the driver is energised.
- Complete and inspect all electrical connections before switching on the power.
- Observe correct polarity throughout the installation.
- Ensure connections are secure and suitably protected for the installation environment.
- Verify that the driver’s output voltage range supports the complete series circuit.
- Check the driver’s minimum and maximum load requirements.
- Configure adjustable constant current drivers to 350mA before energising the circuit.
DO NOT CONNECT THESE FITTINGS IN PARALLEL. INCORRECT WIRING WILL DAMAGE THE LEDs. ALWAYS COMPLETE CONNECTIONS BEFORE SWITCHING ON THE DRIVER.
Always follow the manufacturer’s installation instructions and the wiring diagram supplied with the selected driver. Installation must be carried out by a competent person.
Multiple Halo Marker Lights and Dimming
Several Halo LED marker lights can be installed together to create consistent decorative illumination around suitable architectural and landscape features.
When multiple fittings share one constant current driver, they must be connected in series, with their combined forward voltage falling within the driver’s specified operating range.
For adjustable brightness, a compatible 350mA dimmable driver can be selected. Depending on the model, dimming options may include mains dimming, DALI or 1–10V.
Suitable Applications
- Recessed in-ground marker lighting
- Decorative garden and landscape features
- Low-level architectural accent lighting
- Building entrance lighting
- Residential outdoor lighting schemes
- Suitable pathway-edge marker lighting
- Commercial landscaping installations
Why Choose the Halo Polar White 3000K Marker Light?
The ALL LED AGLH035WH/30 Halo LED Marker Light 3000K combines warm white illumination, Polar White styling and flush anti-glare optics in a compact 1W recessed fitting.
With IP65 protection and 350mA constant current operation, it is suited to appropriately planned architectural installations using compatible LED drivers and suitable mounting arrangements.
Order the ALL LED Halo 3000K marker light from Electrical4Less together with appropriate 350mA drivers and professional electrical installation accessories.
