Dawn 1W LED Eyelid Marker Light 3000K
ALL LED ALRE032AL/30 – Brushed Aluminium IP65 Low Level Lighting
The Dawn 1W LED Eyelid Marker Light 3000K is designed for discreet architectural illumination, combining a warm white light output with a distinctive recessed eyelid design. Manufactured by ALL LED, this compact marker light incorporates a Cree LED diode, diamond-cut lens and matte brushed aluminium bezel, providing controlled illumination for stairways, garden walls, pathways and decorative outdoor installations.
The ALL LED ALRE032AL/30 delivers 44 lumens of 3000K warm white light through a 36° beam. Its partially shielded optical design helps minimise direct glare, while the flush toughened glass and IP65-rated construction provide additional protection for suitable interior and exterior applications.
Key Features
- Brand: ALL LED
- Product Code: ALRE032AL/30
- Range: Dawn
- Product Type: Recessed Eyelid LED Marker Light
- Power: 1W Integrated LED
- Colour Temperature: 3000K Warm White
- Useful Luminous Flux: 44 Lumens
- Beam Angle: 36°
- Peak Intensity: 114cd
- Colour Rendering Index: CRI >80
- Finish: Matte Brushed Aluminium
- IP Rating: IP65 – Dust-tight and protected against water jets
- Operating Current: 350mA Constant Current
- Operating Voltage: 3V
- Electrical Class: Class III
- LED Technology: Cree Diode
- Optics: Diamond-Cut Lens
- Front Glass: Flush Toughened Glass
- Bezel: Super-Slim Eyelid Design
- Visible Diameter: 42mm
- Cut-Out Diameter: 32mm
- Fitting Depth: 37mm
- Pre-Wired Cable: 1 Metre
- Optional Bezels: Carbon Black and Polar White – Sold Separately
- Dimming: Compatible with suitable dimmable 350mA LED drivers
- Rated Lifetime: 50,000 Hours (L70 B50)
- Operating Temperature: -20°C to +50°C
- Manufacturer Guarantee: 3 Years
- LED Driver: Required Separately
3000K Warm White Lighting for Steps and Pathways
The Dawn 1W LED Eyelid Marker Light 3000K provides a balanced warm white lighting effect suitable for residential and commercial spaces. Its 3000K colour temperature produces comfortable illumination without the cooler appearance of 4000K lighting or the deeper warm tone of 2700K alternatives.
With a 44-lumen output, this Dawn LED Step Light is particularly useful for subtle low-level guidance lighting. Installers can position multiple fittings along pathways, steps or walls to create a coordinated lighting arrangement while keeping the light sources discreet.
The partially shielded eyelid design directs light towards the intended surface, helping minimise unwanted glare around pedestrian areas and architectural features.
Diamond-Cut Lens and Cree LED Technology
The ALL LED ALRE032AL/30 incorporates a Cree LED diode and precision diamond-cut lens to provide controlled illumination through a 36° beam angle.
The optical design is intended to achieve low-glare lighting while maintaining useful light distribution. This makes the fitting suitable for decorative applications where the appearance of the illuminated surface is as important as the visible light output.
Its integrated LED offers a rated lifetime of 50,000 hours (L70 B50), reducing the need for frequent lamp replacement in suitably designed installations.
Super-Slim Brushed Aluminium Eyelid Bezel
The Brushed Aluminium Eyelid Light features a super-slim front bezel that complements modern interior and exterior architectural finishes.
The matte brushed aluminium appearance works particularly well alongside natural stone, contemporary brickwork, painted walls and timber features. Flush toughened glass protects the optical components while maintaining a neat recessed appearance.
With a 42mm visible diameter, 32mm cut-out and 37mm fitting depth, the Dawn marker light can be incorporated into suitable prepared mounting surfaces without requiring a large visible lighting fixture.
IP65 Protection for Recessed Low Level Lighting
The Dawn 1W LED Eyelid Marker Light 3000K is rated IP65, offering dust-tight protection and resistance to water jets when correctly installed.
This IP65 Low Level Marker Light is suitable for appropriately designed indoor and outdoor applications, including:
- Garden steps and external staircases
- Low-level architectural wall lighting
- Pathway and pedestrian guidance lighting
- Patio and courtyard illumination
- Decorative lighting around entrances
- Recessed ground-level marker lighting
The fitting includes a factory-fitted 1m cable. Any connections exposed to outdoor conditions must be appropriately protected against moisture and installed in accordance with the manufacturer’s instructions.
Interchangeable Bezels for the ALL LED Dawn Range
The ALRE032AL/30 is supplied with a matte brushed aluminium eyelid bezel. Additional finishes are available separately, allowing the appearance of the fitting to be changed without replacing the complete LED unit.
- ALL LED ALRE032BZ/BLK – Carbon Black Dawn Eyelid Bezel
- ALL LED ALRE032BZ/WH – Polar White Dawn Eyelid Bezel
The interchangeable bezels feature an Easy-Fit threaded screw-on/off arrangement, making them convenient for replacement or decorative finish changes.
Important: Alternative bezels are sold separately. They change the appearance of the fitting but do not alter its 3000K colour temperature or electrical specifications.
IMPORTANT INSTALLATION INSTRUCTIONS – SERIES WIRING ONLY
WARNING: INCORRECT CONNECTIONS CAN PERMANENTLY DAMAGE THE LED MARKER LIGHTS!
MULTIPLE LED FITTINGS MUST BE CONNECTED IN SERIES – NEVER IN PARALLEL.
The ALL LED ALRE032AL/30 operates at 350mA constant current and requires a compatible external LED driver. The driver is sold separately and is not included with the fitting.
- Connect multiple LED marker lights in series, following the manufacturer’s wiring instructions.
- Never connect the fittings in parallel.
- Never connect the LED fittings directly to a 230V mains supply.
- Use a compatible 350mA constant current LED driver with the correct output voltage and power range.
- Ensure the combined LED load falls within the driver’s operating limits.
- Disconnect the power supply before making or changing electrical connections.
- Complete all LED connections before energising the driver.
IMPORTANT: Always follow the manufacturer’s installation instructions. Incorrect wiring, an unsuitable driver or an incorrect operating current may permanently damage the integrated LED.
Compatible ALL LED 350mA Constant Current Drivers
The Dawn 1W LED Eyelid Marker Light 3000K requires a suitable 350mA constant current driver. ALL LED offers non-dimmable, dimmable and adjustable-current driver options for different lighting configurations.
- ADRCC350/1-11 – Non-dimmable 350mA constant current driver, rated 1–11W.
- ADRCC350TD/1-4 – Dimmable 350mA driver, rated 1–4W.
- ADRCC350NANOTD/2-4 – Compact dimmable 350mA driver, rated 2–4W.
- ADRCC350TD/4-9 – Dimmable 350mA driver, rated 4–9W.
- ADRCC350TD/9-18 – Dimmable 350mA driver, rated 9–18W.
- ADRCC350TD/12-25 – Dimmable 350mA driver, rated 12–25W.
- ADRCC12D/100-440MA – 12W adjustable constant current driver with DALI and 1–10V dimming options.
- ADRCC30D/300-900MA – 30W adjustable constant current driver with DALI and 1–10V dimming options.
For adjustable-output drivers, the operating current must be configured to 350mA. The connected LED load must remain within the driver’s minimum and maximum output voltage and power limits.
Important: Driver wattage alone does not confirm compatibility. Always check the manufacturer’s technical specifications for the selected LED driver and the number of fittings connected.
Explore More ALL LED Marker Lights
Browse our ALL LED Marker Lights category for additional recessed marker lights, outdoor step lighting, ground-level architectural fittings and replacement bezels in different finishes and colour temperatures.
Why Choose Electrical4Less?
Electrical4Less is an independent electrical wholesaler and proud member of the Independent Buying Association (IBA) and the Electrical Distributors’ Association (EDA). We supply professional ALL LED lighting products and accessories, combining established industry relationships with competitive trade pricing, knowledgeable customer service and nationwide UK delivery.
Whether purchasing individual Dawn marker lights, replacement bezels or compatible LED drivers, Electrical4Less provides a convenient source for professional lighting products and installation accessories.
