Oxford 1W LED Low Level Light 3000K
ALL LED ALRD032WH/30 – IP65 Round Marker Light in Polar White
The Oxford 1W LED Low Level Light 3000K from ALL LED provides soft, controlled illumination for steps, walls, plinths and architectural features. Featuring a compact round design in Polar White, this recessed LED marker light combines understated styling with a frosted glass diffuser to produce a gentle, soft-edged lighting effect.
The ALL LED ALRD032WH/30 offers up to 80 lumens of 3000K warm white illumination through a 50° beam angle. Its ultra-slim profile makes it particularly suitable for installations where discreet lighting is preferred, while IP65 protection allows use in appropriately designed indoor and outdoor environments.
Key Features
- Brand: ALL LED
- Product Code: ALRD032WH/30
- Range: Oxford
- Product Type: Round Recessed LED Marker Light
- Power: 1W Integrated LED
- Colour Temperature: 3000K Warm White
- Light Output: Up to 80 Lumens
- Beam Angle: 50°
- Colour Rendering Index: CRI >80
- Finish: Polar White
- IP Rating: IP65 – Dust-tight and protected against water jets
- Operating Current: 350mA Constant Current
- Diffuser: Frosted Glass for Soft-Edged Illumination
- Optical Design: Low-Glare Lighting
- Profile: Ultra-Slim Recessed Construction
- Pre-Wired Cable: 1 Metre
- Cut-Out Diameter: 32mm
- Dimming: Compatible with Suitable Dimmable 350mA LED Drivers
- Rated LED Lifetime: 50,000 Hours
- LED Driver: Required Separately
Soft 3000K Warm White Lighting for Steps and Plinths
The Oxford 1W LED Low Level Light 3000K is designed to create comfortable illumination around stairways, wall bases and architectural details. Its warm white colour temperature complements domestic interiors, landscaped gardens and commercial environments where subtle lighting is preferred over brighter overhead illumination.
The frosted glass diffuser produces a soft-edged beam, reducing the appearance of harsh lighting transitions. Combined with the 50° distribution, this allows the Oxford fitting to provide gentle illumination across nearby surfaces.
Multiple lights can be arranged along staircases, corridors and low-level walls to create a coordinated lighting scheme, with fitting positions selected according to the desired lighting effect.
Ultra-Slim Round Marker Light in Polar White
The Oxford Round LED Marker Light features a simple circular front design that integrates neatly into modern architectural surfaces. Its Polar White finish is particularly suitable for painted walls, light-coloured stair risers, rendered surfaces and contemporary interiors.
Unlike decorative eyelid marker lights that use a partially shielded opening, the Oxford design incorporates a frosted glass diffuser to provide a softer, more evenly distributed appearance.
The compact recessed construction makes the fitting an attractive choice where larger surface-mounted wall lights would be visually intrusive.
IP65 Protection for Indoor and Outdoor Applications
The ALL LED ALRD032WH/30 is rated IP65, providing protection against dust ingress and water jets when installed in accordance with the manufacturer’s instructions.
This Polar White LED Step Light is suitable for a variety of appropriately designed lighting applications, including:
- Indoor staircases and landings
- Low-level wall illumination
- Kitchen plinth and architectural feature lighting
- Hallways and pedestrian corridors
- Outdoor entrance areas and sheltered wall installations
- Decorative garden and pathway marker lighting
Outdoor installation must include suitable protection for electrical joints and connections. The IP65 rating applies to the fitting when correctly installed and does not automatically protect external cable connections.
350mA Constant Current with Dimming Options
The Oxford 1W LED Low Level Light 3000K operates using a 350mA constant current supply. A suitable external LED driver is required to power the integrated LED.
For lighting arrangements using multiple Oxford fittings, the lights must be connected in series within the operating limits of the selected driver.
The fitting can also be dimmed when used with a compatible dimmable 350mA constant current driver, allowing the illumination level to be adjusted for decorative, residential or commercial lighting requirements.
IMPORTANT INSTALLATION INSTRUCTIONS – SERIES WIRING ONLY
WARNING: INCORRECT CONNECTIONS CAN PERMANENTLY DAMAGE THE LED MARKER LIGHTS!
MULTIPLE LED FITTINGS MUST BE CONNECTED IN SERIES – NEVER IN PARALLEL.
The ALL LED ALRD032WH/30 operates at 350mA constant current and requires a compatible external LED driver. The driver is sold separately and is not included with the fitting.
- Connect multiple LED marker lights in series, following the manufacturer’s wiring instructions.
- Never connect the fittings in parallel.
- Never connect the fittings directly to a 230V mains supply.
- Use a compatible 350mA constant current LED driver with the correct output voltage and power range.
- Ensure the combined LED load falls within the driver’s operating limits.
- Disconnect the power supply before making or changing electrical connections.
- Complete all LED connections before energising the driver.
IMPORTANT: Always follow the manufacturer’s installation instructions. Incorrect wiring, an unsuitable driver or an incorrect operating current may permanently damage the integrated LED.
Compatible ALL LED 350mA Constant Current Driver Options
The Oxford 1W LED Low Level Light 3000K requires a suitable 350mA constant current driver. The following ALL LED driver options accommodate different lighting arrangements, including non-dimmable, dimmable and adjustable-current systems, subject to their electrical specifications.
- ADRCC350/1-11 – Non-dimmable 350mA constant current driver, rated 1–11W.
- ADRCC350TD/1-4 – Dimmable 350mA constant current driver, rated 1–4W.
- 350mA Nano Dimmable Driver – Compact dimmable constant current driver, rated 2–4W.
- ADRCC350TD/4-9 – Dimmable 350mA driver, rated 4–9W.
- ADRCC350TD/9-18 – Dimmable 350mA driver, rated 9–18W.
- ADRCC350TD/12-25 – Dimmable 350mA driver, rated 12–25W.
- ADRCC12D/100-440MA – 12W adjustable constant current driver with DALI and 1–10V dimming options.
- ADRCC30D/300-900MA – 30W adjustable constant current driver with DALI and 1–10V dimming options.
For adjustable-output drivers, the operating current must be configured to 350mA. The total connected LED load must remain within the driver’s minimum and maximum output voltage and power limits.
Important: Driver wattage alone does not confirm electrical compatibility. Always check the specifications of the selected driver and the connected LED fittings before installation.
Explore More ALL LED Marker Lights
Browse our ALL LED Marker Lights category for the complete collection of recessed Oxford, Dawn, Pathfinder and Sloane lighting products, including different bezel finishes and colour temperatures.
Why Choose Electrical4Less?
Electrical4Less is an independent electrical wholesaler and proud member of the Independent Buying Association (IBA) and the Electrical Distributors’ Association (EDA). We supply professional ALL LED lighting products and accessories, combining established industry relationships with competitive trade pricing, knowledgeable customer service and nationwide UK delivery.
Whether selecting Oxford marker lights for a residential staircase or sourcing LED drivers for a larger commercial project, Electrical4Less offers a convenient source for professional lighting equipment and installation accessories.
