Dawn 1W LED Eyelid Marker Light 4000K
ALL LED ALRE032AL/40 – IP65 Brushed Aluminium Low Level Light
The Dawn 1W LED Eyelid Marker Light 4000K combines distinctive architectural styling with controlled, low-glare illumination. Manufactured by ALL LED, this recessed 1W fitting features a matte brushed aluminium bezel, a diamond-cut lens and an integrated Cree LED diode. Its eyelid-shaped design directs light downwards, making it particularly suitable for steps, pathways, entrance areas and decorative ground-level lighting.
The ALL LED ALRE032AL/40 delivers 50 lumens of 4000K cool white illumination through a focused 36° beam. The super-slim bezel and flush toughened glass help create a neat installation, while the IP65 rating provides protection against dust and water jets in suitable indoor and outdoor environments.
Key Features
- Brand: ALL LED
- Product Code: ALRE032AL/40
- Range: Dawn
- Product Type: Recessed Eyelid LED Marker Light
- Power: 1W Integrated LED
- Colour Temperature: 4000K Cool White
- Light Output: 50 Lumens
- Beam Angle: 36°
- Peak Intensity: 126cd
- Colour Rendering Index: CRI >80
- Finish: Matte Brushed Aluminium
- IP Rating: IP65
- Operating Current: 350mA Constant Current
- Operating Voltage: 3V
- LED Technology: Cree Diode
- Optics: Diamond-Cut Lens for controlled illumination
- Front Glass: Flush Toughened Glass
- Bezel: Super-Slim Eyelid Design
- Visible Diameter: 42mm
- Cut-Out Diameter: 32mm
- Fitting Depth: 37mm
- Cable: 1 Metre Pre-Wired
- Dimming: Compatible with a suitable dimmable LED driver
- Expected LED Lifetime: 50,000 Hours (L70 B50)
- Manufacturer Guarantee: 3 Years
- LED Driver: Required Separately
Distinctive Eyelid Design with Controlled Light Distribution
The Dawn 1W LED Eyelid Marker Light 4000K features a partially shielded light source designed to reduce direct glare. Its eyelid-style bezel helps direct illumination towards the surrounding surface rather than exposing the entire LED to view.
Combined with the diamond-cut lens, this design produces focused illumination suitable for defining steps, illuminating low-level wall features and providing subtle guidance lighting along walkways.
The cool white 4000K output offers a crisp, contemporary appearance that complements modern paving, architectural metalwork and minimalist exterior designs.
Matte Brushed Aluminium Finish and Slim Recessed Profile
The Dawn Eyelid Marker Light is designed for installations where a discreet appearance is important. Its 42mm diameter front bezel, 32mm cut-out and 37mm fitting depth allow the luminaire to be recessed into suitable prepared surfaces.
The matte brushed aluminium finish provides an attractive metallic appearance, while the flush toughened glass helps protect the integrated LED and optical components.
This compact design makes the ALRE032AL/40 a practical option for wall-mounted marker lighting, low-level installations and suitably prepared ground locations.
IP65 Protection for Interior and Exterior Lighting
With IP65 protection, the Dawn 1W LED Eyelid Marker Light 4000K is dust-tight and resistant to water jets when correctly installed. This makes it suitable for appropriately designed indoor and outdoor installations.
Typical applications include:
- Outdoor stair and step illumination
- Recessed pathway marker lighting
- Low-level garden and landscape lighting
- Architectural wall lighting
- Entrance areas and pedestrian routes
- Decorative lighting around patios and paving
The supplied 1m pre-wired cable supports connection to a suitable constant current lighting circuit. Outdoor cable joints must be appropriately protected against moisture.
Interchangeable Bezels – Change the Appearance
The Dawn range offers additional bezel finishes, allowing the appearance of the fitting to be changed without selecting a different LED colour temperature.
Optional accessories include:
- ALRE032BZ/BLK – Carbon Black Bezel for Dawn Eyelid Marker Light
- ALRE032BZ/WH – Polar White Bezel for Dawn Eyelid Marker Light
IMPORTANT: Alternative bezels are sold separately. This product is supplied in the standard matte brushed aluminium finish.
IMPORTANT INSTALLATION INSTRUCTIONS – SERIES WIRING ONLY
WARNING: INCORRECT CONNECTIONS CAN PERMANENTLY DAMAGE THE LED MARKER LIGHTS!
MULTIPLE LED FITTINGS MUST BE CONNECTED IN SERIES – NEVER IN PARALLEL.
The ALL LED ALRE032AL/40 operates at 350mA constant current and requires a compatible external LED driver. The driver is sold separately and is not included with the fitting.
- Connect multiple LED marker lights in series, following the manufacturer’s wiring instructions.
- Never connect the fittings in parallel.
- Never connect the fittings directly to a 230V mains supply.
- Use a compatible 350mA constant current LED driver with the correct output voltage and power range.
- Ensure the combined LED load falls within the driver’s operating limits.
- Disconnect the power supply before making or changing electrical connections.
- Complete all LED connections before energising the driver.
IMPORTANT: Always follow the manufacturer’s installation instructions. Incorrect wiring, an unsuitable driver or an incorrect operating current may permanently damage the integrated LED.
Compatible ALL LED 350mA Driver Options
The Dawn 1W LED Eyelid Marker Light 4000K requires a 350mA constant current driver. ALL LED offers several driver options for different circuit sizes and dimming requirements.
- ADRCC350/1-11 – Non-dimmable 350mA constant current driver, rated 1–11W.
- ADRCC350TD/1-4 – Dimmable 350mA constant current driver, rated 1–4W.
- ADRCC350NANOTD/2-4 – Compact dimmable constant current driver, rated 2–4W.
- ADRCC350TD/4-9 – Dimmable 350mA driver, rated 4–9W.
- ADRCC350TD/9-18 – Dimmable 350mA driver, rated 9–18W.
- ADRCC350TD/12-25 – Dimmable 350mA driver, rated 12–25W.
- ADRCC12D/100-440MA – 12W adjustable constant current driver with DALI and 1–10V dimming options.
- ADRCC30D/300-900MA – 30W adjustable constant current driver with DALI and 1–10V dimming options.
For adjustable-output drivers, the operating current must be set to 350mA. Driver selection must account for the total connected load and the manufacturer’s minimum and maximum output voltage limits.
Important: Driver wattage alone does not confirm compatibility. Check the technical specifications of the selected driver before installation.
Explore More ALL LED Marker Lights
Discover additional architectural lighting options in our ALL LED Marker Lights category, featuring low-level step lighting, recessed ground lights and decorative marker fittings in different finishes and colour temperatures.
Why Choose Electrical4Less?
Electrical4Less supplies ALL LED architectural and outdoor lighting products for electricians, contractors and property owners throughout the UK. Choose the Dawn 1W LED Eyelid Marker Light 4000K for its distinctive downward-facing design, 50-lumen cool white output and discreet brushed aluminium construction.
