Pathfinder Bi-Directional LED Light 3000K
ALL LED APF032AL/02/30 – IP65 Low Level Marker Light in Matte Brushed Aluminium
The Pathfinder Bi-Directional LED Light 3000K is a compact recessed marker light designed to provide subtle illumination in two directions. Manufactured by ALL LED, this 1W fitting features a matte brushed aluminium finish, frosted glass diffusers and an anti-glare design, making it an attractive solution for stairways, pathways and contemporary outdoor spaces.
The ALL LED APF032AL/02/30 combines a discreet, ultra-slim appearance with 3000K warm white illumination. Its IP65-rated construction provides protection against dust and water jets, while the bi-directional arrangement allows light to spread across both sides of the fitting for practical low-level guidance lighting.
Key Features
- Brand: ALL LED
- Product Code: APF032AL/02/30
- Range: Pathfinder
- Light Source: Integrated 1W LED
- Colour Temperature: 3000K Warm White
- Finish: Matte Brushed Aluminium
- Light Direction: Bi-Directional – Two-Way Illumination
- IP Rating: IP65 – Dust-tight and protected against water jets
- Operating Current: 350mA Constant Current
- Anti-Glare Design: Helps reduce direct glare
- Frosted Glass Diffusers: Soften and distribute the light output
- Profile: Ultra-slim recessed construction
- Drive-Over Rating: Up to 2 metric tonnes when correctly installed with the AGL/MS032 mounting sleeve
- Mounting Sleeve: AGL/MS032, 32mm – Sold Separately
- Pre-Wired Cable: 1 metre
- Dimming: Compatible with suitable dimmable 350mA LED drivers
- LED Driver: Required separately and not included
Bi-Directional Lighting for Pathways and Stairways
The Pathfinder Bi-Directional LED Light 3000K projects illumination in two opposing directions, helping to define pedestrian routes and architectural boundaries. Unlike the single-direction Pathfinder version, this model can provide light on both sides of the fitting, making it useful for pathways, stair landings, paved areas and decorative landscape lighting.
The integrated frosted glass diffusers help create a softer lighting effect, while the anti-glare design improves visual comfort. Its 3000K warm white colour temperature provides welcoming illumination suited to residential gardens, hospitality settings and commercial pedestrian areas.
Matte Brushed Aluminium Finish and IP65 Protection
This Bi-Directional LED Marker Light features a contemporary matte brushed aluminium exterior that complements stone paving, modern interiors and outdoor architectural finishes. Its ultra-slim visible profile allows the fitting to sit discreetly within appropriately prepared mounting surfaces.
With an IP65 protection rating, the APF032AL/02/30 offers dust-tight construction and resistance to water jets when correctly installed. The integrated 1W LED provides efficient low-level lighting without the need for a conventional replaceable lamp.
Drive-Over Rated with Optional 32mm Mounting Sleeve
The ALL LED APF032AL/02/30 is designed for suitable recessed ground-level installations. When installed correctly using the manufacturer’s AGL/MS032 32mm mounting sleeve, the fitting can withstand drive-over loads of up to 2 metric tonnes.
IMPORTANT: The AGL/MS032 mounting sleeve is sold separately and is required to achieve the stated drive-over rating. The fitting must be installed in accordance with ALL LED’s instructions and the conditions of the mounting surface.
A factory-fitted 1m cable is provided for connection to the lighting circuit. Outdoor electrical connections must have suitable protection against moisture and water ingress.
IMPORTANT INSTALLATION INSTRUCTIONS – SERIES WIRING ONLY
WARNING: INCORRECT CONNECTIONS CAN PERMANENTLY DAMAGE THE LED MARKER LIGHTS!
MULTIPLE LED FITTINGS MUST BE CONNECTED IN SERIES – NEVER IN PARALLEL.
The ALL LED APF032AL/02/30 operates at 350mA constant current and requires a compatible external LED driver. The driver is sold separately and is not included with the fitting.
- Connect multiple LED marker lights in series, following the manufacturer’s wiring instructions.
- Never connect the fittings in parallel.
- Never connect the LED fittings directly to a 230V mains supply.
- Use a compatible 350mA constant current LED driver with the appropriate output voltage and power range.
- Ensure the total number of connected fittings is within the driver’s specified operating limits.
- Switch off the power supply before installing or modifying any connections.
- All connections must be completed correctly before the driver is energised.
IMPORTANT: Always check the manufacturer’s installation instructions before connecting or powering the fittings. Incorrect wiring or the use of an unsuitable driver may cause permanent LED damage.
Compatible ALL LED 350mA Drivers
The Pathfinder Bi-Directional LED Light 3000K requires a compatible 350mA constant current LED driver. The following ALL LED drivers provide options for different installation sizes and dimming requirements.
- ADRCC350/1-11 – Non-dimmable 350mA driver, supporting 1–11 x 1W LEDs.
- ADRCC350TD/1-4 – Dimmable 350mA driver, supporting 1–4 x 1W LEDs.
- ADRCC350NANOTD/2-4 – Compact dimmable driver, supporting 2–4 x 1W LEDs.
- ADRCC350TD/4-9 – Dimmable 350mA driver, supporting 4–9 x 1W LEDs.
- ADRCC350TD/9-18 – Dimmable 350mA driver, supporting 9–18 x 1W LEDs.
- ADRCC350TD/12-25 – Dimmable 350mA driver, supporting 12–25 x 1W LEDs.
- ADRCC12D/100-440MA – Adjustable constant current driver with DALI and 1–10V dimming options.
- ADRCC30D/300-900MA – Adjustable constant current driver with DALI and 1–10V dimming options.
For adjustable-output drivers, the operating current must be set to 350mA. The maximum number of connected fittings depends on the driver’s output voltage, power rating and total LED load. Check the manufacturer’s specifications before installation.
Explore More ALL LED Marker Lights
Browse our ALL LED Marker Lights category for additional recessed ground lights, directional step lights and low-level marker lighting in various finishes and colour temperatures.
Order from Electrical4Less
Electrical4Less supplies professional ALL LED architectural lighting to electricians, contractors and property owners across the UK. Choose the Pathfinder Bi-Directional LED Light 3000K for discreet two-way illumination, modern aluminium styling and dependable IP65 protection in appropriately designed lighting installations.
