Pathfinder 1W LED Low Level Light 4000K
ALL LED APF032AL/01/40 – Unidirectional IP65 LED Marker Light
The Pathfinder 1W LED Low Level Light 4000K from ALL LED is designed to deliver precise, directional illumination for modern indoor and outdoor spaces. This compact recessed marker light features a matte brushed aluminium finish, a frosted glass diffuser and an anti-glare design, making it ideal for illuminating pathways, stairways, entrances and architectural details.
The ALL LED APF032AL/01/40 produces clean 4000K cool white illumination, providing clear definition along pedestrian routes and ground-level features. Its unidirectional design directs light towards one side of the fitting, while its ultra-slim profile creates a discreet appearance in contemporary lighting installations.
Key Features
- Brand: ALL LED
- Product Code: APF032AL/01/40
- Product Range: Pathfinder
- Light Source: Integrated 1W LED
- Colour Temperature: 4000K Cool White
- Finish: Matte Brushed Aluminium
- Light Direction: Unidirectional – Single-Direction Illumination
- IP Rating: IP65 – Dust-tight and protected against water jets
- Operating Current: 350mA Constant Current
- Anti-Glare Design: Reduces direct glare for improved visual comfort
- Diffuser: Frosted glass for softer light distribution
- Profile: Ultra-slim recessed construction
- Drive-Over Rating: Up to 2 metric tonnes when correctly installed with the AGL/MS032 mounting sleeve
- Mounting Sleeve: AGL/MS032, 32mm – Sold Separately
- Pre-Wired Cable: 1 metre
- Dimming: Compatible with suitable dimmable 350mA constant current LED drivers
- Driver: Required separately and not included
4000K Cool White Unidirectional Lighting
The Pathfinder 1W LED Low Level Light 4000K creates a defined lighting effect along pathways, staircases and architectural features. Its 4000K colour temperature provides a cooler, more neutral appearance than the 3000K warm white alternative, making it particularly suitable for contemporary interiors, modern paving and commercial environments.
Unlike bi-directional fittings that illuminate two opposing directions, the APF032AL/01/40 directs light towards a single side. This allows installers to position the fitting to illuminate the required area while reducing unnecessary light spill.
The frosted glass diffuser helps soften the integrated LED output, while the anti-glare construction reduces direct brightness when the fitting is viewed from different angles.
Contemporary Brushed Aluminium LED Marker Light
This Unidirectional LED Marker Light features a matte brushed aluminium finish designed to complement modern architectural materials. Its compact dimensions and ultra-slim appearance make it an attractive option for recessed installations where traditional surface-mounted lighting would be too prominent.
The integrated 1W LED provides energy-efficient illumination for low-level applications. Multiple fittings can be positioned along a route to create a coordinated lighting arrangement, with spacing and orientation determined by the required lighting effect.
IP65 Protection for Indoor and Outdoor Installation
The ALL LED APF032AL/01/40 is an IP65 Low Level Lighting fitting suitable for appropriate indoor and outdoor environments. Its dust-tight construction and resistance to water jets provide protection against environmental exposure when installed according to the manufacturer’s instructions.
Potential applications include:
- Residential garden paths and paved walkways
- Outdoor stairways and entrance areas
- Architectural landscape lighting
- Commercial pedestrian routes and corridors
- Decorative ground-level and low-level lighting
Drive-Over Rated with Optional AGL/MS032 Mounting Sleeve
The Pathfinder 1W LED Low Level Light 4000K can be used in selected ground-level installations where occasional vehicle movement may occur.
When correctly installed with the manufacturer’s AGL/MS032 32mm mounting sleeve, the fitting is rated to withstand drive-over loads of up to 2 metric tonnes. This makes it suitable for appropriately designed paved areas and other locations where the specified load rating is sufficient.
IMPORTANT: The AGL/MS032 mounting sleeve is sold separately and is required to achieve the stated drive-over rating.
The fitting includes a factory-fitted 1m cable. For outdoor installations, suitable waterproof connections and appropriate protection for the associated electrical components must be provided.
IMPORTANT INSTALLATION INSTRUCTIONS – SERIES WIRING ONLY
WARNING: INCORRECT CONNECTIONS CAN PERMANENTLY DAMAGE THE LED MARKER LIGHTS!
MULTIPLE LED FITTINGS MUST BE CONNECTED IN SERIES – NEVER IN PARALLEL.
The ALL LED APF032AL/01/40 operates at 350mA constant current and requires a compatible external LED driver. The driver is sold separately and is not included with the fitting.
- Connect multiple LED marker lights in series, following the manufacturer’s wiring instructions.
- Never connect the fittings in parallel.
- Never connect the LED fittings directly to a 230V mains supply.
- Use a compatible 350mA constant current LED driver with the appropriate output voltage and power range.
- Ensure the total number of connected fittings is within the driver’s specified operating limits.
- Switch off the power supply before installing or modifying any connections.
- All connections must be completed correctly before the driver is energised.
IMPORTANT: Always check the manufacturer’s installation instructions before connecting or powering the fittings. Incorrect wiring or the use of an unsuitable driver may cause permanent LED damage.
ALL LED 350mA Constant Current Driver Options
The Pathfinder 1W LED Low Level Light 4000K requires a suitable 350mA constant current LED driver. The following ALL LED drivers provide options for non-dimmable, mains-dimmable and lighting-control installations. Driver selection must take account of the number of connected lights and the driver’s specified voltage and power ranges.
- ADRCC350/1-11 – Non-dimmable 350mA driver, rated 1–11W.
- ADRCC350TD/1-4 – Dimmable 350mA driver, rated 1–4W.
- 350mA Nano Dimmable Driver – Compact dimmable constant current driver, rated 2–4W.
- ADRCC350TD/4-9 – Dimmable 350mA driver, rated 4–9W.
- ADRCC350TD/9-18 – Dimmable 350mA driver, rated 9–18W.
- ADRCC350TD/12-25 – Dimmable 350mA driver, rated 12–25W.
- ADRCC12D/100-440MA – 12W adjustable constant current driver with DALI and 1–10V dimming options.
- ADRCC30D/300-900MA – 30W adjustable constant current driver with DALI and 1–10V dimming options.
For adjustable-output drivers, the operating current must be configured to 350mA. The number of connected fittings must remain within the driver’s specified minimum and maximum output voltage and power limits.
Important: Driver wattage alone does not confirm compatibility. Check the manufacturer’s electrical specifications for both the LED fitting and the selected driver before installation.
Explore More ALL LED Marker Lights
Discover additional recessed lighting options in our ALL LED Marker Lights category, including unidirectional and bi-directional fittings, outdoor step lights and decorative ground-level lighting in various finishes and colour temperatures.
Why Choose Electrical4Less?
Electrical4Less supplies ALL LED architectural and outdoor lighting products to electricians, contractors and homeowners throughout the UK. Choose the Pathfinder 1W LED Low Level Light 4000K for its discreet aluminium construction, controlled one-way illumination and practical IP65 protection for professional lighting installations.
