ALL LED AGLH035WH/40 Halo LED Marker Light 4000K
The ALL LED AGLH035WH/40 Halo LED Marker Light 4000K is a compact 1W recessed in-ground fitting designed to provide crisp, low-level architectural illumination. With its 4000K cool white output, Polar White finish and IP65 protection, it offers a discreet lighting solution for suitable landscaped areas, entrance features and decorative ground-level installations.
Featuring flush anti-glare optics, the Halo LED marker light is designed to minimise visual discomfort while maintaining a subtle, integrated appearance. Its low-profile construction makes it attractive for modern architectural projects where the fitting itself should remain unobtrusive.
Key Features – Halo 4000K LED Marker Light
- 1W recessed LED marker light
- 4000K cool white colour temperature
- Contemporary Polar White finish
- IP65 protection against dust and water jets
- Flush optical design for discreet ground-level mounting
- Anti-glare optics for comfortable accent lighting
- Toughened construction for suitable recessed applications
- Suitable for decorative garden and architectural lighting
- 350mA constant current operation
- Dimmable with a compatible dimmable LED driver
- Supplied with a 1-metre pre-wired cable
- Requires a separately purchased 350mA constant current driver
- Multiple fittings must be connected in series
4000K Cool White Illumination for Contemporary Landscapes
The Halo 4000K marker light produces a clean, neutral-to-cool white lighting effect that complements modern outdoor architecture and contemporary landscaping materials.
Compared with the warmer 2700K Halo version, this model offers a crisper lighting appearance that can enhance pale stone, concrete, light-coloured paving and architectural details.
Its 1W output is particularly appropriate for decorative accent lighting, helping create visual definition without the scale of larger outdoor luminaires.
Polar White Finish and Flush Anti-Glare Optics
The Polar White finish gives this LED marker light a clean appearance that suits light-coloured architectural surroundings.
Its flush optical design helps maintain a discreet profile when installed into an appropriate recessed surface. Anti-glare optics provide a controlled lighting effect, making the fitting useful in locations where decorative illumination should not become visually intrusive.
Multiple Halo marker lights can be arranged at planned intervals to create coordinated ground-level lighting patterns around suitable architectural features.
Technical Specifications
| Manufacturer | ALL LED |
|---|---|
| Product Code | AGLH035WH/40 |
| Product Range | Halo |
| Product Type | Recessed In-Ground LED Marker Light |
| Rated Power | 1W |
| Operating Current | 350mA Constant Current |
| Colour Temperature | 4000K Cool White |
| Finish | Polar White |
| Optics | Flush Anti-Glare Design |
| Ingress Protection | IP65 |
| Mounting | Recessed In-Ground |
| Pre-Wired Cable | 1 Metre |
| Dimmable | With Compatible Dimmable Driver |
| LED Driver | Required – Sold Separately |
| Multiple Fitting Connection | Series Wiring |
Architectural In-Ground Marker Lighting
The ALL LED AGLH035WH/40 Halo LED Marker Light 4000K is intended for decorative installations where low-profile marker lights can complement the surrounding architecture.
Potential applications include landscaped features, suitable garden installations, entrance areas and carefully planned ground-level lighting schemes.
The IP65 rating provides protection against dust and water jets but does not establish suitability for continuous immersion, standing water or vehicle loading. Installers must assess mounting conditions, drainage and the manufacturer’s installation requirements before selecting the fitting for a particular location.
Installation and 350mA Constant Current Requirements
The Halo marker light includes a factory-fitted 1-metre connection cable, allowing installers to route connections towards a compatible LED driver.
Before installation, the mounting surface, recess dimensions, drainage arrangements, cable routes and driver accessibility should be checked.
This fitting operates at 350mA constant current. It requires a separately purchased constant current driver and must never be connected directly to a 230V mains supply.
ALL LED 350mA Constant Current Driver Options
The ALL LED AGLH035WH/40 Halo LED Marker Light 4000K requires a suitable 350mA constant current LED driver, available separately.
Correct driver selection depends on the total number of LED fittings, their combined forward voltage, the driver’s output voltage range and any required dimming functionality.
Electrical4Less offers the following ALL LED driver options for consideration, subject to confirmation of electrical compatibility:
- ALL LED ADRCC350/1-11 – 1–11W non-dimmable 350mA constant current driver.
- ALL LED ADRCC350TD/1-4 – 1–4W dimmable 350mA driver.
- ALL LED ADRCC350ANOTD/2-4 – 2–4W dimmable 350mA Nano driver.
- ALL LED ADRCC350TD/4-9 – 4–9W dimmable 350mA driver.
- ALL LED ADRCC350TD/9-18 – 9–18W dimmable 350mA driver.
- ALL LED ADRCC350TD/12-25 – 12–25W dimmable 350mA driver.
- ALL LED ADRCC12D/100-440MA – Adjustable 12W constant current driver with DALI and 1–10V dimming. Must be configured to 350mA.
- ALL LED ADRCC30D/300-900MA – Adjustable 30W constant current driver with DALI and 1–10V dimming. Must be configured to 350mA.
Browse our ALL LED 350mA mains dimmable LED drivers for additional lighting control options.
Important: The wattage rating alone does not guarantee compatibility. Always verify the driver’s minimum and maximum loads, output voltage range and the total forward voltage of the connected fittings.
IMPORTANT INSTALLATION INSTRUCTIONS – SERIES WIRING ONLY
WARNING: INCORRECT CONNECTIONS WILL DAMAGE THE LED FITTINGS!
The ALL LED AGLH035WH/40 Halo LED Marker Light 4000K operates at 350mA CONSTANT CURRENT and must be connected to a correctly specified constant current LED driver.
MULTIPLE LED FITTINGS MUST BE CONNECTED IN SERIES – NEVER IN PARALLEL.
- Connect the positive (+) output of the LED driver to the positive (+) connection of the first LED fitting.
- Connect the negative (-) connection of the first fitting to the positive (+) connection of the next fitting.
- Continue connecting further fittings in the same series arrangement.
- Connect the negative (-) connection of the final fitting to the negative (-) output of the driver.
- Never connect these fittings directly to a 230V mains supply.
- Never connect or disconnect LED fittings while the driver is energised.
- Complete and inspect all connections before switching on the power.
- Observe correct polarity throughout the installation.
- Ensure electrical connections are suitably protected for the environment.
- Verify that the driver’s output voltage range supports the complete series circuit.
- Check the driver’s minimum and maximum load requirements.
- Configure adjustable constant current drivers to 350mA before energising the circuit.
DO NOT CONNECT THESE FITTINGS IN PARALLEL. INCORRECT WIRING WILL DAMAGE THE LEDs. ALWAYS COMPLETE CONNECTIONS BEFORE SWITCHING ON THE DRIVER.
Always follow the manufacturer’s installation instructions and the wiring diagram supplied with the selected driver. Installation must be carried out by a competent person.
Multiple Halo Marker Lights and Dimming
Several Halo LED marker lights can be arranged to create consistent decorative lighting patterns across suitable architectural surfaces.
Where multiple fittings are powered by one constant current driver, the fittings must be wired in series. Their combined forward voltage must fall within the driver’s specified output voltage range.
For adjustable brightness, a compatible dimmable driver can be selected. Depending on the model, dimming options may include mains dimming, DALI and 1–10V.
Suitable Applications
- Decorative recessed in-ground lighting
- Modern garden and landscape installations
- Low-level architectural marker lighting
- Residential entrance lighting features
- Suitable pathway-edge lighting
- Commercial landscaping and decorative outdoor installations
- Ground-level accent lighting where mounting conditions permit
Why Choose the Halo Polar White 4000K LED Marker Light?
The ALL LED AGLH035WH/40 Halo LED Marker Light 4000K combines clean white illumination, flush anti-glare optics and an understated Polar White finish in a compact recessed fitting.
Its IP65 protection and low-energy 1W output make it attractive for appropriately designed architectural installations where discreet decorative marker lighting is required.
Order the ALL LED Halo 4000K marker light from Electrical4Less together with suitable 350mA constant current drivers and electrical installation accessories.
