Wago 274-4205/000-9315 Modular Through Connector – Pack of 60
The Wago 274-4205/000-9315 modular through connector provides five separate electrical potentials, with four clamping connections per pole. This white 274 Series connector uses orange operating levers and Push-in CAGE CLAMP® technology to accommodate different types of copper conductor in organised connection assemblies. This listing is for one manufacturer’s box containing 60 connectors.
Five-Pole, Four-Conductor Connection Arrangement
Each connector has 20 clamping units across five poles, allowing four conductor terminations at each potential. The Wago 274-4205/000-9315 modular through connector is rated 24A and 450V according to IEC/EN 60998-2-2 (overvoltage category II, pollution degree 2), with a maximum conductor cross-section of 2.5mm².
Push-in CAGE CLAMP® with Levers
Solid conductors from 0.5 to 2.5mm² can be inserted using the push-in termination feature. The orange levers enable termination of compatible stranded and fine-stranded copper conductors, as well as conductor release. Consult the manufacturer’s conductor-specific limits and ferrule requirements before installation.
Modular Interlocking and Mounting
Wago 274 Series modules can be interlocked to build custom connection strips. Screw mounting with M3 screws is possible; suitable locking pins, jumpers and strain relief plates are available separately. Jumper slots are positioned below the conductor entries on both sides. Manufacturer restrictions apply to commoning between module sizes.
Key Features
- Manufacturer part number: 274-4205/000-9315
- Supply quantity: 60 connectors per box
- Five poles and 20 clamping units, with four connections per pole
- Five separate electrical potentials; no protective earth (PE) contact
- Rated current: 24A (IEC); rated voltage: 450V (IEC, category II)
- Maximum copper conductor size: 2.5mm²
- Lever-actuated Push-in CAGE CLAMP® connection system
- White housing and cover with orange levers
- 10mm pin spacing and interlocking modular construction
- Optional accessories include jumper connections, strain relief plates and locking pins
Technical Specifications
- Brand: Wago; series: 274
- Product type: Modular through connector
- Poles: 5; clamping units: 20; potentials: 5
- Electrical rating: 24A / 450V (IEC/EN 60998-2-2, overvoltage category II, pollution degree 2)
- UL rating: 15A / 300V
- Rated impulse withstand voltage: 4kV (IEC category II)
- Solid conductor: 0.2–2.5mm²; solid push-in: 0.5–2.5mm²
- Stranded conductor: 0.2–1.5mm²
- Fine-stranded conductor: 0.2–2.5mm²
- Fine-stranded with insulated ferrule: 0.25–1mm²
- Fine-stranded with ferrule, push-in: 0.75–1.5mm²
- Stripping length: 7–9mm (datasheet connection data)
- Dimensions: 51mm (W) × 14.1mm (H) × 28.4mm (D)
- Mounting: Screw mount; compatible accessories available separately
- Housing: Polycarbonate; UL94 V2; actuator: orange
- Installation ambient temperature: -35°C to +60°C
- Country of origin: Germany
- GTIN: 4066966897340
Compatible Accessories
- Wago 274-5252 – 2-pole white strain relief plate
- Wago 274-5253 – 3-pole white strain relief plate
Important: Accessories are supplied separately. The product listing covers a manufacturer’s box of 60 modular through connectors. Refer to the Wago datasheet for termination and mounting guidance. The datasheet installation notes also mention an 8–10mm stripping length, whereas its connection-data table specifies 7–9mm; confirm the applicable value with Wago before installation.
Explore More Wago Products
Browse our Wago connectors range for additional electrical connection solutions, or visit the Electrical4Less Wago shop to explore more products from Wago.
