ALL LED AWC/4Z/RMT RF Remote
The ALL LED AWC/4Z/RMT RF Remote gives you a straightforward way to operate compatible StripLink+ LED lighting without reaching for your phone. Pair it with an ALL LED AWC/STRIP/REC receiver and you can manage up to four independently selected lighting zones from one handheld controller. This is particularly useful when the same project has lighting under cabinets, around a ceiling and behind shelving, and you want each area to respond separately.
What does a four-zone remote actually do?
Think of a zone as a group of lights you want to control together. For example, the kitchen worktop strip could be Zone 1, display shelving Zone 2, and an illuminated ceiling feature Zone 3. Each area needs a compatible LED strip, power supply and receiver; the remote then sends wireless RF commands to the receivers assigned to the chosen zones. The lighting response depends on the installed strip type and receiver configuration.
You can also group multiple compatible receivers in a single zone when several runs should respond together. The receiver manual explains how one remote zone may be linked to multiple receivers, and how separate remotes can be used where required. This makes it possible to extend a lighting scheme without creating a separate hand-held control for every run.
How it works with StripLink+
- Handheld RF control: operate compatible receiver-controlled lighting locally, without needing to open the Tuya app each time.
- Four zones: organise different rooms or lighting areas into separately selectable groups.
- Easy to expand: add compatible AWC/STRIP/REC receivers to further LED runs and assign them to the required zone.
- Flexible system: the AWC/STRIP/REC receiver can also use Wi-Fi/Tuya and compatible wall-switch control; this remote is an optional additional control method.
What else do you need to order?
This remote is a control accessory, not a complete LED strip kit. For a new installation you will also need (1) LED strip of the correct type and voltage, (2) a suitably rated constant-voltage DC LED driver, and (3) an ALL LED AWC/STRIP/REC StripLink+ receiver for each independently controlled circuit or run as required by the wiring design. Cables, strip connectors and any mounting profile should be chosen to suit the installation. If you already have an AWC/STRIP/REC system, this is the matching optional four-zone RF control shown in its manufacturer’s literature.
Important compatibility distinction: the AWC/4Z/RMT works with the StripLink+ receiver family. Do not assume it can control the separate ASC/PX/REC SPI pixel receiver used for addressable Pro-Digital AST12PX strips; those use their own pixel-control accessories.
Pairing the remote with a receiver
The AWC/STRIP/REC installation instructions describe placing the receiver into pairing mode by powering it, holding its SET button or using the connected push switch, then selecting the desired remote zone during the pairing window. A successful pairing is confirmed by a sequence of flashes from the connected LED strip. When several receivers belong to the same area, pair each receiver to the chosen zone in accordance with the instructions. For the exact button sequence and unpairing procedure, refer to both the receiver instructions and the separate AWC/4Z/RMT instruction manual supplied in the product downloads.
Technical specifications – ALL LED AWC/4Z/RMT RF Remote
| Manufacturer | ALL LED |
|---|---|
| Product code | AWC/4Z/RMT |
| Product type | Wireless RF remote control |
| Lighting zones | 4 independently selectable zones |
| Compatible receiver | AWC/STRIP/REC StripLink+ 5-in-1 LED strip receiver (sold separately) |
| Typical applications | Grouped LED strip lighting in kitchens, shelving, coves and feature lighting |
| Power, battery and physical dimensions | Check the AWC/4Z/RMT manufacturer datasheet before specifying |
Getting the right result
Start with the type of light you want: single-colour white, adjustable white or colour-changing LED strip. Choose an appropriate strip and matching driver first, then add the AWC/STRIP/REC receiver and this remote if you would like convenient four-zone wireless control. That way each component has a clear job, and the system can be expanded sensibly later.
Complete Your Lighting Installation
Build a complete StripLink+ setup with a compatible LED strip, a correctly rated power supply and the appropriate receiver or RF control accessory. Browse ALL LED strip lights and ALL LED drivers for the rest of your installation.
If you are comparing different dimming and control arrangements, see our LED strip controllers range. The StripLink+ system must not be confused with addressable SPI pixel controls.
Complete Your StripLink+ System
Combine the receiver with a compatible control and strip. A correctly rated DC power supply is also required for the installation.
- required StripLink+ 5-in-1 receiver (AWC/STRIP/REC)
- alternative wall-mounted control (AWC/4Z/WS)
