ALL LED AWC/4Z/WS 4 Zone RF Wall Station
Give your LED strip lighting a proper place on the wall. The ALL LED AWC/4Z/WS 4 Zone RF Wall Station is a fixed-position control option for compatible StripLink+ lighting installations. Rather than looking for a handheld remote or opening an app, you can keep everyday lighting control in one convenient location. It is particularly useful in kitchens, living rooms, bedrooms and display areas where several sections of LED strip need to be controlled separately.
Technical specifications – ALL LED AWC/4Z/WS 4 Zone RF Wall Station
| SKU | AWC/4Z/WS |
|---|---|
| Product type | Four-zone RF wall station |
How does the four-zone wall station work?
The wall station sends wireless RF control commands to compatible receivers. A zone is simply a lighting area or group of lights that you want to operate together. For example, kitchen worktop lighting could be assigned to one zone, shelf lighting to a second, and ceiling feature lighting to a third. Compatible receivers are paired with the relevant zone so you can choose the area you want to adjust. The available lighting effects and adjustments depend on the connected LED strip and receiver configuration.
Importantly, the wall station does not power an LED strip directly. The separate receiver handles the strip outputs, while a correctly rated low-voltage LED driver provides the power. This separation makes it easier to build a lighting system that fits the room instead of forcing every strip onto a single switch.
Build a complete StripLink+ lighting system
- AWC/4Z/WS wall station: the convenient, fixed-position control point for the lighting zones.
- AWC/STRIP/REC 5-in-1 LED strip receiver: fitted between the matching DC driver and the conventional LED strip to control brightness and supported colour modes. Use a compatible receiver for each independently controlled lighting circuit or group.
- Compatible LED strip: choose single-colour, tunable-white/CCT, RGB, RGBW or RGBCCT strip according to the lighting effect you want and verify the receiver’s mode and channel requirements.
- Suitable constant-voltage LED driver: select a 12–48V DC supply matching the strip’s rated voltage, and size its power capacity for the total load with an appropriate allowance.
- Optional AWC/4Z/RMT handheld RF remote: useful where you would also like portable control alongside the wall station, subject to pairing compatibility.
For a simple single-colour cabinet run, a suitable LED strip, driver and receiver may be all that is required alongside the wall station. For a larger scheme, additional receivers allow separate areas to respond to their assigned zones. The key is to choose the strip, driver and receiver as a matched system.
Why choose a wall station?
- Provides a consistent location for everyday lighting adjustments.
- Four-zone approach helps organise lighting in different parts of a room.
- Wireless RF control avoids using a phone for routine operation.
- Complements compatible StripLink+ receivers and the optional handheld remote.
- Suitable for planned architectural, kitchen and feature LED strip installations.
Installation and pairing notes
Plan your zone assignments before mounting the station, and pair it to the intended compatible receivers following the manufacturer’s instructions. Check the installation manual for the wall station’s own power requirements, mounting arrangement, RF range and exact pairing sequence before installation. Do not assume it is a mains switch, an LED power supply or a universal controller for other wireless protocols. Any electrical connections must be carried out safely with the supply isolated and in accordance with the manufacturer’s guidance.
Before you order ALL LED AWC/4Z/WS 4 Zone RF Wall Station
The ALL LED AWC/4Z/WS 4 Zone RF Wall Station is a control accessory, not a complete LED strip kit. To create a working installation, select the appropriate compatible LED strips, AWC/STRIP/REC receiver(s) and correctly rated DC driver(s) separately. If you are building a multi-zone system, consider adding the AWC/4Z/RMT handheld remote as a second control option. Check compatibility and product instructions before ordering.
Complete Your Lighting Installation
Build a complete StripLink+ setup with a compatible LED strip, a correctly rated power supply and the appropriate receiver or RF control accessory. Browse ALL LED strip lights and ALL LED drivers for the rest of your installation.
If you are comparing different dimming and control arrangements, see our LED strip controllers range. The StripLink+ system must not be confused with addressable SPI pixel controls.
Complete Your StripLink+ System
Combine the receiver with a compatible control and strip. A correctly rated DC power supply is also required for the installation.
- required StripLink+ 5-in-1 receiver (AWC/STRIP/REC)
- optional handheld four-zone remote (AWC/4Z/RMT)
