Wago 274-2405 5 Pole 32A Modular Through Connector – Pack of 70
The Wago 274-2405 is an unmarked, five-pole modular through connector in Wago’s 274 Series. It provides two conductor connections per pole, giving 10 clamping units across five separate electrical potentials. Designed for compact, configurable terminal-strip assemblies, the connector combines a white housing with orange levers and Push-in CAGE CLAMP® technology. This listing is for a manufacturer’s box of 70 connectors, not individual pieces.
32A Inline Lever Connector for 4mm² Copper Conductors
This Wago 274-2405 5 pole connector is rated 32A at 450V under IEC/EN 60998-2-2. The corresponding UL ratings are 20A and 300V, with a rated impulse withstand voltage of 4kV. The five poles remain electrically separate unless suitable jumpers are installed; there is no integrated PE contact.
Push-in CAGE CLAMP® Connections
The 2-conductor lever connector accepts solid copper conductors from 0.2–4mm² (direct push-in 0.5–4mm²), stranded conductors from 0.2–2.5mm² and fine-stranded conductors from 0.2–4mm². Fine-stranded conductors with insulated ferrules are accommodated from 0.25–1.5mm²; fine-stranded conductors with ferrules for direct push-in are specified at 1–2.5mm². The datasheet specifies an 8–10mm stripping length. Follow Wago’s installation instructions for the conductor type in use.
Modular, Interlocking Terminal Strip Design
Wago 274 inline lever connectors can interlock vertically with compatible 2-conductor and 4-conductor modules to make custom multi-pole terminal strips. M3 screw mounting is supported; locking pins and DIN-35 rail mounting feet are optional. Jumper slots under the conductor entries allow potential distribution without sacrificing a conductor opening, provided the correct accessory and permitted arrangement are used.
Key Features
- Five poles with two conductor connections each: 10 clamping units
- 32A, 450V IEC rating; 20A, 300V UL rating
- For copper conductors up to 4mm², depending on type and termination
- Push-in CAGE CLAMP® connection with orange operating levers
- Unmarked white housing and white cover
- Modular interlocking design with M3 screw mounting
- 8mm pin spacing; no integrated protective-earth contact
- Supplied in a manufacturer’s box of 70 pieces
Technical Specifications
- Manufacturer / series: Wago 274
- Product code: 274-2405
- GTIN: 4066966869903
- Standard: IEC/EN 60998-2-2
- Rated current: 32A IEC / 20A UL
- Rated voltage: 450V IEC / 300V UL
- Rated impulse withstand voltage: 4kV
- Poles / connections: 5 poles / 2 conductors per pole
- Clamping units / potentials: 10 / 5
- Solid conductors: 0.2–4mm²; direct push-in solid: 0.5–4mm²
- Stranded conductors: 0.2–2.5mm²; fine-stranded: 0.2–4mm²
- Fine-stranded with insulated ferrules: 0.25–1.5mm²; with ferrules, push-in: 1–2.5mm²
- Strip length: 8–10mm
- Dimensions: 41mm (W) × 15.2mm (H) × 31.9mm (D)
- Pin spacing: 8mm
- Housing: polycarbonate (PC), UL94 V2; white cover and orange actuators
- Installation ambient: −35°C to +60°C; continuous operating temperature: 105°C
- RoHS status: compliant, no exemption
- Country of origin: Germany
- Package: 70 connectors per box
Related Wago Accessories
The manufacturer’s datasheet identifies the following optional accessories, sold separately:
- Wago 274-3402 – insulated 2-way push-in jumper for compatible jumper slots
- Wago 274-3452 – 2-pole white strain relief plate, 15.2mm wide, 8mm pin spacing
- Wago 274-3453 – 3-pole white strain relief plate, 22.6mm wide, 8mm pin spacing
Wago also describes compatible mounting accessories including 209-189 DIN-35 snap-in feet. Do not use a jumper and a strain relief plate in the same slot. Step-down commoning from 4mm² modules to 2.5mm² modules is not permitted.
Browse More Wago Connectors
Find other sizes and configurations in our Wago connectors category, or explore more Wago products and accessories in the Electrical4Less Wago Shop.
For the latest approvals and installation instructions, consult Wago’s official 274-2405 product page.
