ALL LED AST05/COB/40 COB LED Strip
Supplied cut per metre – bespoke options available
Standard ordering: This LED strip is sold in metre units and cut to the length ordered. Lengths are supplied subject to the manufacturer’s permitted cutting intervals and available stock. If your project needs a different cut length, pre-prepared connections or another customised specification, contact Electrical4Less to request a quote for a bespoke version before ordering. Customised options are subject to manufacturer availability and confirmation.
For long, understated runs of neutral-white illumination, the ALL LED AST05/COB/40 COB LED Strip offers a useful balance of smooth light and modest power consumption. Part of the Seamless range, its densely packed COB design reduces the visible dots associated with conventional LED tape. The 4000K output works particularly well for task and architectural accents where a clean, natural white is wanted.
Why choose ALL LED AST05/COB/40 COB LED Strip?
- Seamless-style light output across the strip
- 4000K neutral white with 500 lumens per metre
- Low 5W per metre draw on a 24V DC supply
- 8mm-wide strip suits many compact aluminium profiles
- 50mm marked cut points for accurate sizing
- 3M adhesive backing; dimmable with a compatible dimmable LED driver
- Suitable for dry indoor IP20 installations
Technical specifications – ALL LED AST05/COB/40 COB LED Strip
| Manufacturer code | AST05/COB/40 |
|---|---|
| Light colour | 4000K neutral white |
| Light output | 500lm/m |
| Power consumption | 5W/m |
| Supply voltage | 24V DC |
| Strip width | 8mm |
| LED density | 320 LEDs/m |
| Cut interval | 50mm |
| Beam angle | 180° |
| Colour rendering index | >90 |
| SDCM | <6 |
| Ingress protection | IP20 |
| Current (manufacturer stated) | 0.208A |
| Manufacturer reel length | 40m |
| Maximum powered run | 10m single-ended / 20m double-ended |
| Ambient operating temperature | -20°C to +40°C |
| Rated lifetime (L70 B50) | 30,000 hours |
| Manufacturer guarantee | 3 years |
Installation and compatibility
Install on a clean, dry, smooth surface, removing the 3M backing only when positioning the tape. Avoid sharp folds; cut only at the 50mm marked intervals and use suitable connectors or properly made joints. Supply from a correctly sized 24V constant-voltage LED driver. For dimming, use a compatible dimmable driver. Observe the manufacturer’s 10m single-end or 20m double-end feed guidance and allow adequate driver capacity for the complete run.
Before you order ALL LED AST05/COB/40 COB LED Strip
IP20 is intended for dry indoor use, not exposed outdoor or wet locations. The LED tape needs a suitable 24V driver and any required control accessories. Sold per metre; confirm how the required length will be supplied before installation.
Complete Your Lighting Installation
Choosing the right 24V power supply is just as important as choosing the strip. Browse our ALL LED LED drivers and aluminium LED strip profiles to plan a neat, protected installation.
For alternative colour temperatures and suitable lighting types, see the 24V seamless COB LED strip range.
Compare Colour Temperatures & IP Ratings
Choose the same colour temperature in the other IP rating, or compare the other colour temperatures in this range before ordering.
- 4000K IP67 version (AST05IP/COB/40)
- 2200K IP20 alternative (AST05/COB/22)
- 2700K IP20 alternative (AST05/COB/27)
- 3000K IP20 alternative (AST05/COB/30)
