ALL LED ASC/PX/REC Pixel Receiver
The ALL LED ASC/PX/REC Pixel Receiver provides the control interface for compatible ALL LED Pro-Digital SPI pixel LED strip installations. It is a key part of a pixel-lighting setup, allowing the strip to respond to suitable control devices rather than simply switching the whole run between single colours. For feature coves, counters and decorative lighting, that makes it possible to plan movement and colour transitions into the finished scheme.
Why choose this product?
- Designed for compatible ALL LED Pro-Digital SPI pixel LED strips
- Supports a system with a compatible Wi-Fi receiver/control arrangement and suitable accessories, where specified by ALL LED
- Associated ALL LED controls include ASC/PX/RMT remote and ASC/PX/WSW/1Z wall station (sold separately)
- Useful for coordinated RGB feature lighting and pixel-based scene control
- Manufacturer datasheet and installation instructions linked separately
Technical specifications – ALL LED ASC/PX/REC Pixel Receiver
| Product code | ASC/PX/REC |
|---|---|
| Product type | Pro-Digital pixel strip receiver |
| Intended system | Compatible ALL LED Pro-Digital SPI pixel LED strip systems |
| Compatible accessories shown in manufacturer strip literature | ASC/PX/RMT remote; ASC/PX/WSW/1Z wall station |
| Output rating / supply / terminals | Refer to the receiver datasheet and installation instructions before specifying |
Installation and compatibility
Select the receiver alongside the intended pixel strip, control method and a suitably rated power supply. Verify its electrical ratings, terminals, wiring layout, maximum supported pixel count and pairing procedure against the ASC/PX/REC-specific manufacturer datasheet and instruction manual before connecting power. Isolate the supply while wiring or servicing. Do not assume that a standard non-addressable RGB controller can be substituted.
Before you order ALL LED ASC/PX/REC Pixel Receiver
The receiver is a control component, not an LED strip or power supply. Check the required remote, wall station, network or app setup separately. The exact electrical limits and programming steps have deliberately not been invented where the receiver PDF content could not be read.
Complete Your Lighting Installation
This ColourPixel+ control product is intended for a compatible SPI pixel-lighting system. You will also need the correct receiver or control accessory, suitable pixel strip and power supply as applicable. Browse ALL LED strip lights and ALL LED drivers when planning the full installation.
Our LED strip controller range contains other control options, but standard RGB controllers should not be assumed compatible with SPI pixel lighting.
Compatible ColourPixel+ Components
This is part of the addressable SPI pixel system, not the conventional 5-in-1 StripLink+ system. Check the required receiver, strip and control options below.
- IP20 addressable RGB pixel strip (AST12PX/RGB)
- IP67 addressable RGB pixel strip (AST12PX/IP/RGB)
- compatible 8-scene RF remote (ASC/PX/RMT)
- compatible 4-scene wall station (ASC/PX/WSW/1Z)
