Collingwood DLSENSE H2 Sense 6W Fire-Rated LED Downlight
The Collingwood DLSENSE H2 Sense Downlight is a 6W integrated LED fitting with a selectable 2700K, 3000K or 4000K colour temperature. It fits a 68–72mm ceiling cut-out and is designed for use with a separately purchased H2 Sense bezel.
IMPORTANT – NO BEZEL OR PIR SENSOR INCLUDED. This product is the DLSENSE downlight only. For automatic motion detection you MUST also buy one of the PIR bezels listed below. The PIR sensor is built into the PIR bezel, NOT into the downlight supplied here.
What Do I Need to Order?
- Buy this DLSENSE downlight. This is the actual LED light fitting.
- Choose ONE bezel for each downlight. Buy a PIR bezel if you want the light to respond to movement, or a standard bezel if you do not need motion detection.
- Optional: Select an emergency converter only if your installation requires emergency lighting and the configuration is suitable.
Choose a PIR Bezel – Automatic Movement Detection
These bezels have the motion sensor built in and are sold separately. Choose one colour:
- White PIR bezel – movement sensor built into the bezel
- Black PIR bezel – movement sensor built into the bezel
- Brushed steel PIR bezel – movement sensor built into the bezel
With a PIR bezel installed, the system can respond to movement, with adjustable hold time (30 seconds–15 minutes), sensor sensitivity (approximately 10cm–2m) and daylight (lux) settings.
Choose a Standard Bezel – No PIR Sensor
Choose one of these if you want the downlight without automatic motion detection:
- White standard bezel – no motion sensor
- Black standard bezel – no motion sensor
- Brushed steel standard bezel – no motion sensor
What Does the Switched-Live Output Do?
With a suitable PIR arrangement, the switching output can control other connected lighting up to the manufacturer’s stated 200W limit and a maximum of 30 H2 Sense fittings. The extra lights do not each need a PIR bezel to be controlled from the PIR switching arrangement. Wiring and load suitability must be checked by the installer.
Key Features
- 6W integrated LED, non-dimmable
- Switchable 2700K warm white, 3000K warm white or 4000K neutral white
- 600lm at 2700K, 650lm at 3000K and 675lm at 4000K
- 50° beam angle; CRI >80; up to 113lm/W
- IP65 from below and IP20 from above
- 68–72mm cut-out; maximum ceiling thickness 40mm
- Fire ratings: solid timber 30/60/90 minutes, I-joist 30 minutes and metal web 30 minutes under specified test conditions
- 220–240V AC, Class II, integrated loop-in/loop-out terminals
- Compatible with rolled and blown insulation as specified by the manufacturer
- 44,000-hour L70 B10 LED lifetime; five-year warranty
Optional Emergency Lighting Accessories
Emergency converters are not included. Collingwood lists LEDEP14 standalone emergency converter for the non-PIR arrangement and LEDEP15 primary switching emergency converter for the PIR arrangement. Check installation requirements before ordering.
Frequently Asked Questions
Does this downlight come with a PIR sensor?
No. The movement sensor is part of the separate PIR bezel. You must purchase both the DLSENSE fitting and a compatible PIR bezel.
Does the downlight come with a decorative bezel?
No. Every DLSENSE downlight needs a separately ordered H2 Sense bezel, either PIR or non-PIR.
Can I use a standard bezel instead?
Yes. A standard bezel gives you the chosen finish without adding a PIR movement sensor.
Can I dim this downlight?
No. DLSENSE is non-dimmable.
See the Collingwood H2 Sense product range for manufacturer information.
