Wago 274-2405/000-9322 Marked 5 Pole Modular Through Connector – Pack of 70
The Wago 274-2405/000-9322 is a 5-pole modular through connector with two conductor clamping points per pole. This marked variant provides ten clamping units and five separate electrical potentials for clear, organised wiring. Its white polycarbonate housing, orange lever actuators and Push-in CAGE CLAMP® technology support quick copper conductor termination. Supplied as one complete box of 70 connectors.
32A Marked Modular Connector for 4mm² Wiring
Designed for modular electrical connections, the Wago 274-2405/000-9322 is rated 32A at 450V in accordance with IEC/EN 60998-2-2, with a 4kV impulse withstand rating. It has no integrated protective-earth contact. The marked levers help identify individual potentials; follow the manufacturer’s product marking for the exact identification scheme.
Push-in CAGE CLAMP® Conductor Connections
The lever-operated terminals accept solid copper conductors from 0.2–4mm², stranded from 0.2–2.5mm² and fine-stranded copper from 0.2–4mm². Suitable solid conductors from 0.5–4mm² can be pushed in directly. Fine-stranded conductors with insulated ferrules are rated 0.25–1.5mm²; direct push-in with ferrules is specified for 1–2.5mm². The manufacturer’s stripping length is 8–10mm.
Flexible Modular Terminal-Strip Design
Compatible Wago 274 Series modules interlock to form multi-pole terminal strips. M3 screw mounting is supported, and optional locking pins or compatible DIN-35 mounting feet offer alternative mounting arrangements. Jumper slots permit potential distribution with suitable accessories. Step-down commoning from 4mm² to 2.5mm² modules is not permitted.
Key Features
- Marked 5-pole through connector, two conductor connections per pole
- 10 clamping units and five separate electrical potentials
- Rated current: 32A IEC; rated voltage: 450V IEC
- Maximum conductor cross-section: 4mm² copper
- Push-in CAGE CLAMP® with orange lever actuation
- White housing and white cover; modular interlocking construction
- No integrated PE contact
- Manufacturer box of 70 connectors; accessories purchased separately
Technical Specifications
- Manufacturer: Wago; SKU: 274-2405/000-9322
- GTIN: 4066966897371
- Standard: IEC/EN 60998-2-2
- Rated voltage: 450V IEC; rated impulse withstand voltage: 4kV
- Solid copper conductor: 0.2–4mm² (direct push-in 0.5–4mm²)
- Stranded copper conductor: 0.2–2.5mm²
- Fine-stranded copper conductor: 0.2–4mm²
- Fine-stranded with insulated ferrule: 0.25–1.5mm²
- Fine-stranded with ferrule, push-in: 1–2.5mm²
- Strip length: 8–10mm
- Pin spacing: 8mm
- Dimensions: 41 × 15.2 × 31.9mm (W × H × D)
- Insulation: polycarbonate; UL94 V2
- Installation ambient: -35°C to +60°C; continuous operating temperature: 105°C
- Manufactured in Germany; box quantity: 70
Related Products & Compatible Accessories
The Wago 274-2405/000-9322 datasheet lists these separately available strain relief accessories:
- Wago 274-3452 – white 2-pole strain relief plate, 15.2mm wide, 8mm pin spacing
- Wago 274-3453 – white 3-pole strain relief plate, 22.6mm wide, 8mm pin spacing
Wago 209-189 mounting feet are also referenced in the installation instructions. Strain relief plates occupy a jumper slot, so a jumper cannot be installed on that same side. Confirm suitable mounting arrangements against the manufacturer’s guidance.
Discover More Wago Connectors
Compare other Wago connectors or browse our wider Wago Shop for electrical installation accessories.
Check the Wago manufacturer product information for installation and approval information. Manufacturer states that the main product illustration may differ from the actual marked item.
