AST05IP/COB/40 IP67 COB Strip
Supplied cut per metre – bespoke options available
Standard ordering: This LED strip is sold in metre units and cut to the length ordered. Lengths are supplied subject to the manufacturer’s permitted cutting intervals and available stock. If your project needs a different cut length, pre-prepared connections or another customised specification, contact Electrical4Less to request a quote for a bespoke version before ordering. Customised options are subject to manufacturer availability and confirmation.
IP67 installation note: Cut ends and all cable joints must be appropriately sealed to maintain the required protection. Have the installation and connections checked by a competent electrician.
For an even line of light where a standard indoor strip would be too exposed, choose the IP67 Seamless COB range. The 4000K neutral white model delivers a fresh, neutral white, making it useful for clean-edged contemporary lighting details. The continuous COB appearance avoids the dotted look associated with widely spaced LEDs.
Why choose the IP67 version?
Unlike the IP20 indoor version, this strip has an IP67-rated protective construction. That can help in damp or exposed installations, but the rating does not automatically make every cut end, joint, connection or driver waterproof. The complete installation must use suitable IP-rated connections and components for its actual location.
What else is needed?
- A 24V constant-voltage power supply sized for the total strip length and installation conditions
- Suitable sealed end terminations, connectors and cable arrangements where the IP rating must be maintained
- An appropriate mounting profile, if required for alignment and heat management
- A compatible dimming arrangement if dimming is wanted
Technical specifications – AST05IP/COB/40 IP67 COB Strip
| SKU | AST05IP/COB/40 |
|---|---|
| Colour temperature | 4000K Neutral White |
| Light output | 490lm/m |
| Operating voltage | 24V DC |
| Power | 5W/m |
| Ingress protection | IP67 (strip as manufactured) |
| LED density | 320 LEDs/m |
| Cut interval | 50mm |
| Beam angle | 180° |
| CRI | >90 |
| Rated lifetime (L70 B50) | 30,000 hours |
| Manufacturer guarantee | 3 years |
| Manufacturer reel length | 30m |
Installation tips
Plan the route before fixing. Apply the 3M-backed strip to a clean, smooth surface and avoid tight or sharp bends. The manufacturer gives up to 10m powered from one end or 20m fed from both ends; any such run needs an electrician to check voltage drop and supply sizing. Use the marked cutting points only, and correctly reseal any cut sections to preserve suitable environmental protection.
Buying ALL LED from Electrical4Less
Electrical4Less works closely with ALL LED and can help you choose compatible lighting components. We are members of the EDA and IBA, and supply electricians and customers across the UK.
Electrical safety
Have the LED strip and power supply installed and connected by a suitably qualified, competent electrician. Isolate the power before working on wiring. Incorrect connections or an unsuitable driver can cause electric shock, overheating, fire or equipment damage. Follow the manufacturer’s installation instructions.
Complete Your Lighting Installation
Choosing the right 24V power supply is just as important as choosing the strip. Browse our ALL LED LED drivers and aluminium LED strip profiles to plan a neat, protected installation.
For alternative colour temperatures and suitable lighting types, see the 24V seamless COB LED strip range.
Compare Colour Temperatures & IP Ratings
Choose the same colour temperature in the other IP rating, or compare the other colour temperatures in this range before ordering.
- 4000K IP20 version for dry indoor areas (AST05/COB/40)
- 2200K IP67 alternative (AST05IP/COB/22)
- 2700K IP67 alternative (AST05IP/COB/27)
- 3000K IP67 alternative (AST05IP/COB/30)
