ALL LED ASC/PX/WSW/1Z Wall Station
Bring colourful addressable lighting under fingertip control with the ALL LED ColourPixel+ one-zone, four-scene wall station. Instead of reaching for a phone, choose a shade on the illuminated touch wheel, adjust brightness or recall a favourite look from the wall. It’s a practical finishing touch for feature ceilings, media walls, display areas and other decorative pixel-strip installations.
What does this wall station do?
The ASC/PX/WSW/1Z is a wireless RF control panel for a compatible ColourPixel+ SPI receiver. The wall station sends commands to the receiver, which operates the connected digital pixel LED strip. It is not itself a power supply, LED driver or strip receiver.
Key features
- One-zone control with four saveable lighting scenes
- Touch-sensitive tempered glass panel and colour wheel
- Colour, brightness, speed and dynamic lighting-effect controls
- Recall four favourite effects from the dedicated scene keys
- Scene lock function helps prevent saved scenes being overwritten accidentally
- Battery powered, with detachable mounting base
- Suitable for wireless control within the manufacturer’s stated 30m unobstructed RF range
Technical specifications – ALL LED ASC/PX/WSW/1Z Wall Station
| Manufacturer code | ASC/PX/WSW/1Z |
|---|---|
| Range | ColourPixel+ |
| Control type | 1-zone, 4-scene RF wall station |
| Battery | CR2032 |
| Dimensions | 86 × 86 × 10mm |
| RF range | 30m unobstructed |
| Material | Polymer body with tempered glass touch panel |
| Protection | IP20 |
| Operating temperature | -30°C to +55°C |
| Manufacturer guarantee | 2 years |
Build a complete pixel lighting system
To use this wall station, choose a compatible ASC/PX/REC ColourPixel+ SPI receiver, an addressable digital strip such as AST12PX/RGB (IP20) or AST12PX/IP/RGB (IP67), and a correctly rated 24V DC constant-voltage LED driver. The receiver processes the commands; the driver supplies power to the strip. For handheld control as well, consider the separate ASC/PX/RMT eight-scene RF remote. Each component is sold separately unless stated in the relevant product listing.
Installation and pairing
Follow the manufacturer’s instructions for mounting the panel. The wall station may be fitted using screws, double-sided tape or magnetic attachment to an appropriate metal surface. Pair it using the receiver’s Match key, then the wall station’s ON/OFF key; the receiver LED confirms successful pairing. The scene buttons allow you to save and recall preferred effects; the manual also explains scene lock and reset operations. Install only after checking receiver and strip compatibility and isolate the electrical supply when working on the wired components.
Why choose the ColourPixel+ wall station?
The ALL LED ASC/PX/WSW/1Z Wall Station makes decorative lighting easier to live with: visitors and family members can change a scene directly from the wall, without needing access to the app. For an addressable SPI installation, it pairs neatly with the ColourPixel+ receiver and your chosen digital strip to create an easy-to-use lighting system.
Complete Your Lighting Installation
This ColourPixel+ control product is intended for a compatible SPI pixel-lighting system. You will also need the correct receiver or control accessory, suitable pixel strip and power supply as applicable. Browse ALL LED strip lights and ALL LED drivers when planning the full installation.
Our LED strip controller range contains other control options, but standard RGB controllers should not be assumed compatible with SPI pixel lighting.
Compatible ColourPixel+ Components
This is part of the addressable SPI pixel system, not the conventional 5-in-1 StripLink+ system. Check the required receiver, strip and control options below.
- required ColourPixel+ SPI receiver (ASC/PX/REC)
- IP20 RGB pixel strip (AST12PX/RGB)
- IP67 RGB pixel strip (AST12PX/IP/RGB)
