VAT:

Hager | ASZ432U | 3 Phase RCBO | 10kA | C Curve | 300mA Type A | 32A

SKU: ASZ432U
Available to Order
Estimated Lead Time:
Usually 1 - 3 Working Days
Read More

Hager ASZ432U 32A C Curve 300mA RCBO is a 10kA electronic 3P+N switched-neutral, three-module RCBO with Type A 300mA residual-current protection. C-curve response suits appropriately designed moderate-inrush circuits.

Hager ASZ432U 32A C Curve 300mA RCBO

The Hager ASZ432U 32A C Curve 300mA RCBO unites a C-curve three-phase breaker and 300mA residual-current detection. The switched-neutral architecture and compact three-module footprint support use in compatible distribution assemblies.

Understanding the 300mA Rating

This 32A / 300mA combination is for protection designs where a 300mA residual threshold is appropriate. It must not be described or relied on as the same level of additional shock protection as a 30mA RCBO. A 300mA rating is not a substitute for 30mA additional protection on circuits where that is required.

Distribution-Circuit Selection

Type A sensitivity does not by itself establish suitability for every EV charger or power-electronic load; follow equipment instructions. This is a C-curve product; substituting D curve changes the instantaneous-trip band and requires design verification.

Technical Specifications – Hager ASZ432U 32A C Curve 300mA RCBO

Manufacturer Hager
Part number ASZ432U
Device Electronic three-phase RCBO with switched neutral
Poles 3P+N; 3 overcurrent-protected phases
Rated current 32A
Trip characteristic C curve
Residual-current sensitivity 300mA
Residual-current class Type A
Rated breaking capacity 10kA
Module width 3 modules
Mounting DIN rail; compatible Hager Invicta distribution arrangement (verify board model)

Understanding B, C and D Trip Curves

B curve: typically 3–5 times rated current for instantaneous magnetic tripping, used for suitable low-inrush circuits. C curve: typically 5–10 times rated current, commonly specified for moderate inrush. D curve: typically 10–20 times rated current, considered for high-inrush loads such as some motors or transformers. Selected model: C curve. These bands describe magnetic tripping, not permissible continuous loading; the installed fault level and disconnection requirements must be verified.

The specific three-phase Hager range in this listing contains C- and D-curve models; no B-curve SKUs are included here.

Related Hager Three-Phase RCBOs

Compare ASZ440U (40A, 300mA) or ASD425U (D curve, 30mA) for a different rating or sensitivity.

Browse Hager Protection

Explore the Hager 3 phase RCBO range, Hager three-phase distribution boards and Hager shop.

Install and test in accordance with the Hager instructions and applicable wiring regulations. Verify the product-specific datasheet and board compatibility before ordering.






Brand

Hager

This product will be ordered from one of ours suppliers. The usual dispatch time to you is displayed above. You will receive a notification if there are any delays once your order is placed.