Rako RLED30BOOST Constant Voltage LED Booster Module
The Rako RLED30BOOST is a 12V/24V DC constant voltage LED booster module designed to extend the lighting load capacity of compatible Rako LED controllers. It works with the RLED30CV4+ wireless controller and WLED30CV4 wired controller, allowing additional constant voltage LED lighting to follow the same dimming and colour control signals.
Supporting three-channel RGB and four-channel RGBW applications, the RLED30BOOST delivers up to 30W per channel at 12V DC or 60W per channel at 24V DC. It is particularly useful for larger LED strip installations where the connected load exceeds the capacity of the main controller.
Key Features – Rako RLED30BOOST
- Constant voltage LED booster for Rako lighting control systems
- Compatible with RLED30CV4+ and WLED30CV4 controllers
- Supports 12V DC and 24V DC lighting installations
- Suitable for three-channel RGB and four-channel RGBW LED loads
- 30W per channel at 12V DC
- 60W per channel at 24V DC
- Maximum total output of 120W at 12V or 240W at 24V with four channels
- Follows the PWM dimming and colour control signal from the main controller
- Up to 10 booster modules can be connected per compatible controller
- Reverse polarity input and output current limit protection
- Integrated 10A blade fuse
- Manual test button for installation checks
Extending LED Strip Lighting Installations
The RLED30BOOST allows additional constant voltage LED lighting loads to be controlled alongside an existing Rako RLED30CV4+ or WLED30CV4 controller.
Rather than operating independently, the booster follows the PWM signal generated by the primary LED controller. This enables connected LED strips to reproduce the same dimming levels and colour settings across larger lighting installations.
Up to 10 RLED30BOOST modules can be used with one compatible controller, provided that each booster has a suitably rated DC power supply for its connected load.
Technical Specifications – Rako RLED30BOOST
| Specification | Details |
|---|---|
| Manufacturer | Rako Controls |
| Part Number | RLED30BOOST |
| Product Type | Constant voltage LED booster module |
| Input Voltage | 12V DC / 24V DC |
| Number of Channels | 3 or 4 |
| Output at 12V DC | 30W per channel |
| Maximum Total Load at 12V | 90W (3 channels) / 120W (4 channels) |
| Output at 24V DC | 60W per channel |
| Maximum Total Load at 24V | 180W (3 channels) / 240W (4 channels) |
| Minimum Load | 1W |
| Control Signal | PWM |
| Compatible Controllers | RLED30CV4+ / WLED30CV4 |
| Maximum Boosters per Controller | 10 |
| Dimensions | 172 × 46 × 40mm |
| Weight | 142g |
| Housing | UL94-V0 |
| Fuse | 10A blade fuse |
| Operating Temperature | +2°C to +40°C |
| Humidity | 5–95% non-condensing |
| Protection | Reverse polarity input and output current limit protection |
| Compliance | UKCA, CE, RoHS, EN 60669-2-5:2016 |
Compatible Rako LED Controllers
- RLED30CV4+: Wireless constant voltage RGBW LED dimmer controller.
- WLED30CV4: Wired constant voltage RGBW LED dimmer controller.
The RLED30BOOST is not a programmable dimmer and does not contain a wireless receiver. It requires a compatible primary controller to provide the PWM control signal.
Installation Requirements
The RLED30BOOST must be installed by a competent electrician in a dry, adequately ventilated and accessible location. It should be mounted vertically with the terminals at the bottom, or horizontally where suitable.
A separate 12V or 24V DC power supply, correctly rated for the connected LED load, is required. The booster must not be connected directly to a mains supply.
Important Information
The Rako RLED30BOOST is a booster module only. It does not operate independently and requires a compatible RLED30CV4+ or WLED30CV4 controller, along with a suitable DC power supply.
The RLED30BOOST replaces the previous RLED30SLAVE product code in Rako’s current range.
