Rako RLED20+CC4 Wireless RGBW Constant Current LED Dimmer
The Rako RLED20+CC4 is a four-channel wireless constant current LED dimmer designed for controlling compatible LED lighting in Rako wireless lighting control systems. Each channel can be controlled independently, allowing RGBW colour mixing and customised lighting scenes.
With selectable 350mA, 500mA and 700mA outputs, the module supports constant current LED loads of up to 20W per channel. It operates from a separate 48V DC power supply and communicates using Rako’s 433.9MHz wireless system.
Key Features – Rako RLED20+CC4
- Four independently controllable constant current LED channels
- RGBW colour mixing and customised lighting effects
- Selectable 350mA, 500mA and 700mA outputs
- Maximum load of 20W per channel
- Maximum forward voltage of 45V per channel
- Supports up to 16 programmable lighting scenes
- 433.9MHz Rako wireless communication
- Manual test button for installation checks
- Suitable for ceiling void or central mounting
- Supplied with a mounting bracket
RGBW Lighting Control
The RLED20+CC4 provides independent control of four constant current LED loads. This makes it suitable for RGBW lighting applications where separate red, green, blue and white channels are used to create different colours and lighting scenes.
The module can be operated using compatible Rako wireless transmitters and can also be integrated into a Rako wired system when within wireless communication range of a WK-HUB.
Technical Specifications
| Specification | Details |
|---|---|
| Manufacturer | Rako Controls |
| Part Number | RLED20+CC4 |
| Product Type | Wireless constant current LED dimmer |
| Number of Channels | 4 independently controlled outputs |
| Input Voltage | 48V DC |
| Output Current | 350mA / 500mA / 700mA selectable |
| Maximum Load | 20W per channel |
| Maximum Forward Voltage | 45V |
| Minimum Load | 3W |
| Wireless Frequency | 433.9MHz |
| Lighting Scenes | Up to 16 |
| Dimensions | 172 × 46 × 40mm |
| Weight | 178g |
| Housing | UL94-V0 |
| Operating Temperature | +2°C to +40°C |
| Humidity | 5–95% non-condensing |
| Communication | Rako FM wireless |
| Compliance | UKCA, CE, RoHS |
Installation and Compatibility
The RLED20+CC4 must be installed by a competent electrician and powered by a suitable external 48V DC supply, such as the Rako RAPSU48, which is sold separately.
Connected constant current LED fittings must be wired in series, with the output current selected to match the LED manufacturer’s requirements. Parallel wiring must not be used.
The module should be installed in a dry, adequately ventilated and accessible location. Avoid enclosed metal housings that could interfere with wireless communication.
Important Information
Power supply not included. The RLED20+CC4 requires a separate 48V DC supply and is designed for constant current LED lighting. It must not be connected directly to a 230V mains supply.
This product replaces the previous RLED20CC3 model. Please confirm compatibility with existing installations before replacing older equipment.
