Heatmiser neoStat V3 Hot Water Programmer White
neoHub Compatibility: For smart control through the Heatmiser neoApp, the neoStat-HW V3 requires a 2nd Generation or later neoHub.
The Heatmiser neoStat V3 Hot Water Programmer White provides flexible control of domestic hot water schedules. The dedicated wired programmer features changeover contacts, making it suitable for standard systems and compatible mid-position valve arrangements.
It can operate as a standalone hot water programmer or connect to a compatible neoHub, sold separately, for remote control through the Heatmiser neoApp. Mesh communication also allows it to form part of a wider Heatmiser neo heating and hot water control system.
Key Features
- White finish
- Dedicated hot water programmer
- Wired, mains-powered control
- Changeover contacts
- Suitable for standard and compatible mid-position valve systems
- 5/2-day, 7-day and 24-hour programming
- Five-minute programming intervals
- Four switching periods per day
- Easy hot water boost function
- Holiday mode
- Keypad locking facility
- White backlit display
- Illuminated soft-touch keys
- Proximity-activated controls
- Mesh networking with a compatible neoHub
- Flush-mounted installation
- Requires a minimum 35mm deep back box
Flexible Hot Water Scheduling
The neoStat-HW V3 supports weekday and weekend, individual 7-day and repeating 24-hour schedules. Up to four on and off periods can be programmed each day in five-minute intervals, allowing hot water operation to be matched to the household routine.
Hot Water Boost
The boost function provides temporary hot water operation outside the normal programmed schedule. Once the selected boost period has ended, the programmer returns to its standard settings.
neoHub Smart Control
When paired with a compatible 2nd Generation or later neoHub, the programmer can be monitored and adjusted through the Heatmiser neoApp. It can also communicate with other compatible neo devices through the Heatmiser mesh network.
Changeover Contact Control
The changeover output provides normally open and normally closed contacts for compatible hot water controls, including systems using motorised valves that require powered opening and closing. System compatibility and the correct wiring arrangement should be confirmed before installation.
Technical Data
- Product type: Hot water programmer
- Control type: Wired
- Supply: Mains powered
- Output: Changeover contacts
- Programming: 5/2-day, 7-day or 24-hour
- Switching periods: Four per day
- Programming intervals: Five minutes
- Interface: Illuminated soft-touch keys
- Mounting: Flush mounted
- Minimum back box depth: 35mm
- Finish: White
The Heatmiser neoStat-HW V3 should be installed by a suitably qualified electrician in accordance with the applicable installation regulations and hot water system requirements.
