ALL LED AB/MSC Q-Nex Plug Play 2-in-1 Microwave Sensor
The ALL LED AB/MSC Q-Nex Plug Play 2-in-1 Microwave Sensor is a programmable lighting control module designed for compatible ALL LED luminaires. Combining microwave motion detection with corridor lighting functionality, it enables automatic switching and adjustable standby dimming to suit different residential and commercial applications.
Part of the ALL LED Q-Nex plug-and-play system, the AB/MSC is designed for quick installation into supported fittings, including the Lennox 2 LED bulkhead. Integrated DIP switches allow installers to configure detection sensitivity, hold time, daylight settings and standby operation without additional programming equipment.
Key Features and Benefits
- 2-in-1 lighting control: Combines microwave on/off operation with programmable corridor lighting functionality.
- Movement detection up to 12m: Suitable for supported fittings installed in corridors, entrances and communal areas.
- Maximum mounting height of 6m: Provides installation flexibility within the manufacturer’s specified limits.
- 150° detection angle: Designed to monitor movement within the configured detection zone.
- Adjustable sensitivity: Select from 25%, 50%, 75% or 100% detection sensitivity.
- Programmable hold times: Configure how long the lighting remains activated following movement detection.
- Daylight detection settings: Adjustable lux thresholds help prevent unnecessary operation when sufficient ambient light is available.
- Corridor standby dimming: Supports 20% standby output or off with compatible luminaires.
- Q-Nex plug-and-play connection: Designed for straightforward installation with supported ALL LED lighting products.
Microwave Movement Detection for Automatic Lighting
The AB/MSC uses microwave sensing technology to detect movement and automatically control a compatible connected LED luminaire.
When movement is detected within the configured zone, the sensor activates the connected lighting. The installer can adjust detection sensitivity and hold time according to the installation requirements.
This functionality is particularly useful in shared access areas where lighting needs to respond automatically as people enter or move through the space.
What Is the Corridor Lighting Function?
Corridor lighting control allows compatible LED fittings to operate at full brightness when movement is detected, before changing to a programmed standby level after the selected hold time.
The AB/MSC offers a 20% standby dimming setting or an off setting, depending on the configured operating mode and connected luminaire.
Rather than requiring full brightness throughout an unoccupied period, corridor operation can provide reduced-output lighting where appropriate, helping manage energy consumption while maintaining the desired lighting arrangement.
Adjustable DIP Switch Settings
The sensor includes integrated DIP switches for configuring its operating characteristics without separate programming equipment.
- Detection sensitivity: 25%, 50%, 75% or 100%.
- Hold time: 5 seconds, 30 seconds, 1 minute, 3 minutes or 10 minutes.
- Standby time: 1, 5 or 10 minutes, or permanent standby.
- Standby dimming: 20% or off.
- Daylight threshold: 2 lux, 10 lux, 25 lux, 50 lux or disabled.
These settings allow the sensor to be configured for different lighting requirements, occupancy patterns and ambient light conditions. Refer to the manufacturer’s installation instructions for the correct DIP switch combinations.
Compatible ALL LED Bulkheads and Q-Nex Accessories
The AB/MSC is designed for compatible ALL LED Q-Nex luminaires. The following related products are available separately from Electrical4Less:
- ALL LED AB/LEN/CCT – Lennox 2 14W IP65 LED Bulkhead: A circular, slim-design LED fitting with selectable 3000K, 4000K and 6000K colour temperatures, IP65 protection, IK08 impact resistance and compatible Q-Nex accessory connections.
- ALL LED AB/EMPACK – Q-Nex Plug and Play 3-Hour Emergency Pack: A rechargeable emergency lighting module providing three hours of battery-backed operation with supported ALL LED luminaires.
Important: The microwave sensor is sold separately from the LED bulkhead and emergency module. Check the manufacturer’s instructions to confirm compatible fittings and supported accessory combinations before installation.
Typical Applications
When installed with a compatible Q-Nex luminaire, this microwave sensor can provide automatic lighting control in locations such as:
- Communal corridors and stairwells
- Apartment blocks and shared entrances
- Office corridors and circulation spaces
- Commercial building access areas
- Utility rooms and storage areas
- Suitable residential and indoor commercial lighting installations
Actual sensor detection performance can vary depending on mounting position, surrounding materials, movement direction and the selected configuration.
Technical Specifications – ALL LED AB/MSC Q-Nex Plug Play 2-in-1 Microwave Sensor
| Manufacturer | ALL LED |
|---|---|
| Product Code | AB/MSC |
| Product Range | Q-Nex Plug & Play |
| Product Type | 2-in-1 Microwave & Corridor Sensor |
| Sensor Technology | Microwave Movement Detection |
| Maximum Detection Range | 12m |
| Maximum Mounting Height | 6m |
| Detection Angle | 150° |
| Detection Sensitivity | 25% / 50% / 75% / 100% |
| Hold Time | 5s / 30s / 1min / 3min / 10min |
| Standby Time | 1min / 5min / 10min / Permanent |
| Standby Dimming | 20% or Off |
| Daylight Settings | 2 / 10 / 25 / 50 lux or Disabled |
| Programming | Integrated DIP Switches |
| Dimensions | 50 × 35 × 18mm |
| Connection | Q-Nex Plug & Play |
| Compatibility | Selected ALL LED Q-Nex Luminaires |
Frequently Asked Questions
What does the ALL LED AB/MSC microwave sensor do?
The AB/MSC is a 2-in-1 lighting control module providing microwave movement detection and programmable corridor lighting functionality for compatible ALL LED Q-Nex luminaires.
What is the maximum detection range?
The manufacturer’s specified maximum detection range is 12 metres, with a maximum mounting height of 6 metres. Actual performance depends on the installation and sensor configuration.
What is the difference between microwave on/off and corridor mode?
Microwave on/off mode automatically switches compatible lighting in response to movement. Corridor mode can reduce the light output to a programmed standby level rather than switching directly off.
Can the microwave sensor sensitivity be adjusted?
Yes. Detection sensitivity can be configured to 25%, 50%, 75% or 100% using the integrated DIP switches.
Can the light remain at reduced brightness when no movement is detected?
Yes. With a compatible luminaire and the appropriate corridor configuration, the module supports a 20% standby dimming level.
Is the AB/MSC compatible with the Lennox 2 LED bulkhead?
Yes. The ALL LED AB/LEN/CCT Lennox 2 LED Bulkhead supports the Q-Nex microwave sensor accessory.
Does this sensor include an LED light fitting?
No. The AB/MSC is supplied as a sensor module only. A compatible Q-Nex LED fitting must be purchased separately.
Can I use the microwave sensor with an emergency pack?
The Q-Nex range also includes the ALL LED AB/EMPACK 3-Hour Emergency Pack. Refer to the manufacturer’s instructions to confirm supported configurations when using multiple accessories with one luminaire.
Complete Your ALL LED Q-Nex Lighting Installation
Pair the AB/MSC microwave sensor with the ALL LED Lennox 2 14W LED Bulkhead for programmable movement-controlled lighting. For installations requiring emergency operation, explore the compatible Q-Nex 3-Hour Emergency Pack, available separately at Electrical4Less.
