Description
The Aico Ei1529RC Hard Wired Alarm Control Switch offers centralised control over your alarm system, enhancing safety and convenience. This mains-powered accessory allows you to test, locate, and silence alarms from a single point, making it an essential addition to any integrated alarm system.
Key Features:
- Mains Powered: Ensures reliable operation with a hard-wired interconnection.
- Control Functions: Test, Locate, and Silence alarms in the system.
- Compatibility: Works with 3000, Ei2110e Multi-Sensor Fire Alarm, 160e Series alarms, 140e Series alarms, and hard-wired interconnected Carbon Monoxide alarms.
- User-Friendly: Wall-mounted for ease of use, with a surface mount box supplied.
Why Use an Alarm Control Switch?
The Aico Ei1529RC Hard Wired Alarm Control Switch allows you to control all alarms in your system from one place. This is especially useful if you have smoke, heat, and carbon monoxide alarms interconnected. By using the control switch, you can quickly identify which alarm has sounded, determine the type of danger present, and decide on the necessary action.
Test, Locate, and Silence
This mains-powered accessory enhances the flexibility and user-friendliness of your alarms by allowing you to remotely test, locate, and silence alarms in the system:
- Test: Check the functionality of the entire alarm system.
- Locate: Identify which alarm has been activated.
- Silence: Quiet any nuisance alarms.
Technical Specification
- Compliance: Meets electrical safety requirements EN61000-6-1:2007, EN61000-6-2:2005 (EMC Directive), and EN60065:2001 + A12:2011 (Low Voltage Directive). Carries the CE mark for Low Voltage and Electromagnetic Compatibility Directives.
- Installation: Wall-mounted for ease of use. Fix it with the supplied surface mount box or a standard recessed box (not supplied). Suitable for installation at any convenient point in the property.
- System Integration: Integrate up to 4 Ei1529RC switches in a hardwired system with a maximum of 16 smoke and heat alarms (3000, 2110e, 160e, or 140RC Series) or 261ENRC Carbon Monoxide alarms.
- Control Features: The unit has three switches marked ‘Locate’, ‘Test’, and ‘Hush’, providing control features and a mains check function.
- Wiring: Install easily with a 3-wire connection of live, neutral, and interconnect/control (standard smoke/heat alarm wiring).
- Dimensions: 90mm x 90mm x 40mm deep.
- Weight: 240g, inclusive of packaging.
- Manufactured: Made in Ireland.
