ALL LED APA333AL Edge Profile
Want to add a line of light along the edge of a tiled wall or a fitted feature without leaving the LED tape exposed? The Stealth Edge APA333AL is a two-metre aluminium edge and tiling profile that helps the strip sit neatly within the finish. The click-in opal polycarbonate diffuser softens the view of the LEDs, while the aluminium body provides a surface for heat dissipation.
Where it works well
It suits planned tiled-edge and architectural lighting details where both the edge finish and the light matter. Set out the profile before tiling so its fixing wing can be properly incorporated into the substrate and tiling finish.
What is included and what else do I need?
- 2m Stealth Edge aluminium profile with click-in opal diffuser and end caps
- A suitable LED strip, correctly sized to fit the channel, purchased separately
- A compatible LED driver and, if dimming or colour control is wanted, a suitable controller
- Replacement or additional end caps available as APA333AL/ACC accessory pack
Technical specifications – ALL LED APA333AL Edge Profile
| Product code | APA333AL |
|---|---|
| Length | 2m |
| Material | Aircraft aluminium |
| Diffuser | Opal polycarbonate |
| Overall profile width | 36mm |
| Channel width shown | 13mm |
| Profile height | 14mm |
| Ingress protection | IP20 |
| Manufacturer warranty | 2 years |
Fitting advice
The manufacturer’s illustration shows the edge profile fixed into position, the adjacent finishing material applied and then the edge finished flush. Check the tile thickness, LED tape width and strip access before fitting; refer to the installation guide for the full sequence.
Buying ALL LED from Electrical4Less
Electrical4Less works closely with ALL LED and can help you choose compatible lighting components. We are members of the EDA and IBA, and supply electricians and customers across the UK.
Installation and electrical safety
Fit the profile securely in accordance with the manufacturer’s instructions. Any connected LED strip, driver or electrical wiring should be installed by a suitably qualified and competent electrician, with the supply safely isolated before electrical work.
Complete Your Lighting Installation
This profile is a mounting component rather than a complete light. Select the LED tape or neon flex specified for the profile and a suitable power supply. See our ALL LED aluminium profiles and ALL LED strip lighting range.
For compatible power supplies, browse ALL LED LED drivers.
Matching Products & Alternatives
For the correct finish, check the matching profile or accessory below. Profiles and accessory packs are separate products.
- matching Stealth Edge accessory pack (APA333AL/ACC)
- Orca coving profile for wall-to-ceiling details (APAORC/WH)
