Rako RAPSU48 48V 60W DC Power Supply
The Rako RAPSU48 is a 48V DC, 60W power supply designed for compatible Rako constant current LED dimming modules. It provides the external DC power required for selected Rako LED controllers, including the RLED45CC1 and RLED20+CC4.
Designed for Rako lighting control installations, the RAPSU48 provides a dedicated power source for compatible LED dimmers, allowing them to regulate connected constant current LED lighting loads.
Key Features
- Genuine Rako Controls power supply
- 48V DC output
- 60W rated output power
- Designed for compatible Rako constant current LED dimmers
- Recommended for use with Rako RLED45CC1
- Suitable for Rako RLED20+CC4 installations, subject to total load requirements
- External power supply for compatible LED control modules
- Suitable for professional lighting control installations
Compatible Rako LED Controllers
The Rako RAPSU48 is intended for use with compatible 48V DC LED control modules, including:
- RLED45CC1: Single-channel constant current LED dimmer with a maximum load of 45W.
- RLED20+CC4: Four-channel RGBW constant current LED dimmer with selectable output currents.
When selecting a power supply, the total connected load must remain within the power supply’s rated capacity. The RLED20+CC4 can support up to 20W per channel, so its maximum theoretical combined load may exceed the 60W rating of the RAPSU48.
Technical Specifications
| Specification | Details |
|---|---|
| Manufacturer | Rako Controls |
| Part Number | RAPSU48 |
| Product Type | DC power supply |
| Output Voltage | 48V DC |
| Rated Output Power | 60W |
| Output Current at Rated Power | 1.25A (calculated) |
| Compatible Equipment | Rako 48V DC constant current LED control modules |
| Application | LED lighting control power supply |
Installation and Power Supply Selection
The RAPSU48 must be installed in accordance with the manufacturer’s instructions and applicable electrical installation requirements.
Before installation, check that the connected controller requires a 48V DC supply and that the combined electrical load does not exceed 60W. Allow for any additional power requirements and follow the appropriate Rako controller installation manual.
Important Information
The Rako RAPSU48 is a power supply only. It does not provide standalone dimming, scene control or wireless communication. A compatible Rako LED dimmer or controller is required.
For higher combined lighting loads, confirm the appropriate power supply rating with Rako Controls before installation.
