Heatmiser neoStat-e V3 Thermostat White
neoHub Compatibility: For smart control through the Heatmiser neoApp, the neoStat-e V3 requires a 2nd Generation or later neoHub.
The Heatmiser neoStat-e V3 Thermostat White is designed to control electric underfloor heating systems. It can operate as a programmable thermostat or time clock and supports smart heating control when connected to a compatible Heatmiser neoHub.
The thermostat offers built-in air sensing, remote air sensing and floor temperature sensing. A 10K floor sensor probe is included, while compatibility with 12K and 15K probes provides additional flexibility for replacement and upgrade installations.
Key Features – Heatmiser neoStat-e V3 Thermostat White
- White finish
- Designed for electric underfloor heating systems
- Programmable thermostat and time clock modes
- 5/2-day, 7-day and 24-hour programming
- Four programmable heating levels
- Built-in air temperature sensor
- 10K floor sensor probe included
- Remote air and floor sensing options
- Optimum start function
- Frost protection mode
- Holiday function
- Temperature hold and override
- Keypad lock facility
- Proximity-activated display and touch keys
- Mesh networking with a compatible neoHub
- 16A maximum switching current
- Fits a standard 35mm deep back box
Programmable Heating Control
The neoStat-e V3 supports weekday and weekend, 7-day and 24-hour programming. It can also be configured as a non-programmable thermostat where simple temperature control is required.
The optimum start function calculates how long the heating system needs to reach the programmed temperature and activates it at the appropriate time, helping to avoid unnecessary heating.
Air and Floor Temperature Sensing
The thermostat can operate using its built-in air sensor, a remote air sensor, the supplied floor sensor or a combination of air and floor sensing. When both sensors are used, the floor probe can limit the maximum floor temperature and help protect the floor from overheating.
Technical Data
- Supply: 230V AC
- Maximum switching current: 16A
- Temperature range: 5°C to 35°C
- Floor temperature limit: 20°C to 45°C
- Frost protection range: 7°C to 17°C
- IP rating: IP20
- Installed dimensions: 85 x 85 x 13mm
- Minimum back box depth: 35mm
- Included probe: 10K floor sensor
- Compatible probe values: 10K, 12K and 15K
- Finish: White
The Heatmiser neoStat-e V3 must be installed by a qualified electrician in accordance with the applicable installation regulations.
