Description
Aurora AU-ST5C ChromaFlex 5 in 1 Controller
Aurora AU-ST5C ChromaFlex 5 in 1 Controller is a compact LED strip control accessory designed for Aurora ChromaFlex 24V DC strip lighting installations. It supports multiple strip types, making it a practical choice where one controller is needed for different Aurora LED strip lighting setups.
The Aurora AU-ST5C ChromaFlex 5 in 1 Controller provides control for single colour, CX, RGB, RGBW and RGBCX ChromaFlex LED strip. It includes an RF receiver, a push dim wiring option for on/off and dimming control, plus easy-to-use push lever terminals for installer-friendly wiring.
How the AU-ST5C Controller Works
This controller is installed between the LED driver and the LED strip. The correct setup is mains power into a suitable 24V DC constant-voltage LED driver, then from the driver into the AU-ST5C controller, and then from the controller to the compatible ChromaFlex LED strip.
A standard non-dimmable 24V DC constant-voltage LED driver is normally used, because the dimming and colour control are handled by the AU-ST5C controller on the low-voltage side. Do not use a constant-current driver, a 12V driver, or a mains dimmer before the driver unless the full system has been checked for compatibility.
The driver must be correctly sized for the total LED strip load, including the full wattage of the strip run connected to the controller. For push dimming, the push switch connects to the controller input, allowing on/off and dimming control through the AU-ST5C rather than through a standard wall dimmer.
Key Features – Aurora AU-ST5C ChromaFlex 5 in 1 Controller
- 5 in 1 controller for Aurora ChromaFlex LED strip systems
- Suitable for single colour, CX, RGB, RGBW and RGBCX control
- Designed for 24V DC constant-voltage LED strip installations
- Use with a correctly sized 24V DC LED driver
- Built-in RF receiver
- Single press function to identify strip
- Double click function to pair remote
- Push dim wiring option for on/off and dimming
- Easy push lever terminals
- White finish
- 3 year manufacturer warranty
Product Details – Aurora AU-ST5C ChromaFlex 5 in 1 Controller
- Brand: Aurora
- SKU: AU-ST5C
- Range: ChromaFlex LED Strip Accessories
- Input voltage: 24V DC max
- Output voltage: DC
- Operating temperature: -20°C to 40°C
- Material: PC + PCB
- Dimensions: 10mm x 45mm x 17mm
Compatible Aurora ChromaFlex Remote
This controller can be paired with the Aurora AU-ST5RC ChromaFlex 5 in 1 Remote for RF remote control of compatible ChromaFlex LED strip installations.
Compatible Aurora 24V Drivers
For the power supply, use a suitably rated Aurora 24V non-dimmable LED driver. The LED driver powers the AU-ST5C controller, and the controller then handles dimming, colour selection and strip control on the low-voltage side.
This setup means the LED driver itself does not need to be dimmable. The correct installation is mains power into a 24V DC constant-voltage driver, then into the AU-ST5C controller, and then out to the compatible Aurora ChromaFlex LED strip.
Always size the driver to suit the total wattage of the LED strip being installed. Do not use a 12V driver, constant-current driver, or a standard mains wall dimmer before the driver unless the full system has been confirmed as compatible.
Shop Aurora LED Strip Lights
For compatible strip lighting options, view our full Aurora LED Strip Lights category, including ChromaFlex LED strip products for single colour, RGB and colour control installations.
