Description
HELIX ONE 5ft 110V LED Non-Corrosive Fitting
The Knightsbridge HEX51 LED Non-Corrosive Fitting is a 5ft HELIX ONE modular luminaire designed for site, commercial, industrial and utility lighting applications. It provides 28W output at 4000K colour temperature, with a yellow carcass for site use and a robust IP66 and IK10 rated body.
Knightsbridge HEX51 HELIX ONE Site Fitting
This HELIX ONE fitting is designed for low voltage site lighting where a yellow body is required. It is compatible with 110V-240V supply and is supplied complete with 1m flex and an IP65 junction box, helping make it practical for site and temporary lighting installations.
The modular design supports plug-and-play accessory options where required. The MODMWS110 microwave sensor and MODEMKIT2110 dual mode emergency conversion kit are available separately, allowing the fitting to be adapted for sensor-controlled or emergency lighting applications.
Applications – Knightsbridge HEX51 LED Non-Corrosive Fitting
This 5ft fitting is suitable for construction sites, temporary lighting setups, plant rooms, workshops, service areas, stores, corridors, utility areas and industrial spaces. The IP66 and IK10 ratings make it a practical option where dust, moisture and impact protection are important.
Key Features – Knightsbridge HEX51 LED Non-Corrosive Fitting
- 5ft HELIX ONE modular non-corrosive LED fitting
- 110V-240V compatible site fitting
- 28W output
- 4000K colour temperature
- Yellow carcass for site and low voltage applications
- IP66 rated for dust and water ingress protection
- IK10 rated for high impact resistance
- Robust anti-corrosive polycarbonate construction
- Stainless steel clips supplied as standard
- Rear, side and end conduit entries
- Body design compatible with BESA box mounting
- Pre-drilled rear and end conduit entries with replaceable end caps
- Large bracket fixing point to help ease mounting
- Detachable terminal blocks for easier cable entry points
- Push-fit loop in-loop out terminal block
- Supplied complete with 1m flex and IP65 junction box
- Compatible with MODMWS110 microwave sensor, sold separately
- Compatible with MODEMKIT2110 dual mode emergency conversion kit, sold separately
- Supplied with surface mount plates as standard
- TORCSUSP suspension kit available separately
Technical Specifications – Knightsbridge HEX51 LED Non-Corrosive Fitting
- Brand: Knightsbridge
- SKU: HEX51
- Range: HELIX ONE
- Product type: Modular non-corrosive LED site fitting
- Length: 5ft
- Input voltage: 110V-240V
- Wattage: 28W
- Colour temperature: 4000K
- Body colour: Yellow
- IP rating: IP66
- IK rating: IK10
- Construction: Polycarbonate
- Included: 1m flex and IP65 junction box
- Sensor option: MODMWS110, sold separately
- Emergency option: MODEMKIT2110, sold separately
- Suspension kit option: TORCSUSP, sold separately
