Description
Mandrex MHM41Q044B Xtra Deep Hole Saw 44x300mm
Mandrex MHM41Q044B MXqs SpeedXcut Hole Saw
The Mandrex MHM41Q044B Xtra Deep Hole Saw 44x300mm is designed for extra deep, clean and accurate cutting across a wide range of trade materials. With a 44mm diameter and 300mm cutting depth, this MXqs SpeedXcut hole saw is ideal for roof transits, pipe installations, ducting, conduit openings and other demanding deep drilling applications.
Manufactured from bi-metal with 8% cobalt M42, the Mandrex MHM41Q044B provides excellent durability, heat resistance and reliable cutting performance under tough site conditions. Its special tooth design helps reduce heat build-up and delivers smooth cutting through suitable metals, timber, plastics and composite materials.
Important: Guide Pin Required
The Mandrex MHM41Q044B Xtra Deep 300mm hole saw requires a separate guide pin for correct use. The guide pin is not included and must be ordered separately.
Required guide pin:
Mandrex MX200078B Guide Pin
Recommended Pre-Drilling Drills
For pre-drilling, choose the correct Mandrex pre-drilling drill for the material being cut:
Mandrex MX2P0075B HSS Pre-Drilling Drill
For metal, timber and general-purpose pre-drilling applications.
Mandrex MX2P0073B TCT Masonry Pre-Drilling Drill
For masonry and harder building materials.
Key Features of Mandrex MHM41Q044B Xtra Deep Hole Saw 44x300mm
- 44mm diameter for accurate, consistent holes
- 300mm cutting depth for extra deep drilling applications
- Bi-metal construction with 8% cobalt M42 for durability and wear resistance
- Special tooth design helps reduce heat build-up during cutting
- Suitable for use with corded and battery-powered tools
- Extra-long side slots assist with easier core removal
- Ideal for roof transits, pipe installations, ducting and conduit openings
- Requires separate MX200078B guide pin for correct use
Technical Specifications – Mandrex MHM41Q044B Xtra Deep Hole Saw 44x300mm
- Product Code: MHM41Q044B
- Product Type: Xtra Deep Hole Saw
- Range: Mandrex MXqs SpeedXcut Xtra Deep
- Hole Saw Diameter: 44mm
- Cutting Depth: 300mm
- Material Composition: Bi-metal with 8% cobalt M42
- Application: Extra deep cutting in suitable metal, timber, plastic and composite materials
- Compatibility: Suitable for corded and battery-powered tools
- Guide Pin: MX200078B required and sold separately
Material Compatibility
The Mandrex MHM41Q044B Xtra Deep Hole Saw 44x300mm is suitable for cutting a wide range of materials, including:
- Metals: Aluminium, brass, carbon steel, cast iron, mild steel, stainless steel, steel profiles, steel tubes and non-ferrous metals
- Woods: Softwood, hardwood, plywood, laminated board, OSB, chipboard, MDF and wood with nails
- Plastics: PVC, acrylic, epoxy, reinforced plastic, fibre-reinforced plastic and general plastics
- Other Materials: Metal pipes, profiles and composite materials
Ideal Applications
- Roof transit installations
- HVAC drilling applications
- Electrical conduit and duct openings
- Deep pipe and service penetrations
- Construction, metal fabrication and carpentry projects
- Plastic and reinforced plastic drilling
About Mandrex
Mandrex produces professional cutting and drilling solutions for trade users who need speed, accuracy and long service life. The MXqs SpeedXcut Xtra Deep range is designed for demanding deep drilling applications where reliable performance and clean results are essential.
