Description
Varilight | MFP1M1 | 1–10V | 2-Way Dimmer Module | 6A
Varilight | MFP1M1 | 1–10V Control Dimmer
The Varilight 1-10V 2-Way Dimmer Module is a professional-grade dimming solution designed specifically for high-frequency dimmable ballasts and LED drivers requiring a 0–10V or 1–10V control signal. Unlike phase-cut dimmers, this module provides precise low-voltage control while independently switching the mains supply, ensuring stable and flicker-free operation.
Rated at 6A switching capacity with a 20mA dimming control signal, the MFP1M1 is ideal for domestic lighting circuits using compatible 1–10V ballasts or drivers. It supports 1-way and 2-way switching, with a maximum of one dimmer per circuit.
Key Features & Benefits – Varilight 1-10V 2-Way Dimmer Module
- Designed for 1–10V / 0–10V dimmable ballasts and LED drivers
- Separate mains switching (6A) and low-voltage dimming control (20mA)
- Suitable for 1-way and 2-way switching circuits
- Compatible with multiple ballasts on a single control circuit
- Reliable, flicker-free dimming for professional installations
- Compact module format for integration into Varilight dimmer plates
- Manufactured to BS EN 60669-2-1
- Supported by Varilight’s 10-year guarantee
Intended Applications – Varilight 1-10V 2-Way Dimmer Module
- Indoor domestic lighting circuits
- LED lighting systems with 1–10V dimmable drivers
- Fluorescent or HF ballast-controlled lighting
- Applications requiring stable low-voltage dimming control
⚠️ For use with 1–10V ballasts/drivers only. Not suitable for phase-dimmable LED lamps.
Technical Specifications
- Model: MFP1M1
- Control Type: 1–10V DC dimming signal
- Operating Voltage: 230V AC, 50Hz (switching)
- Maximum Load (Switching): 6A
- Maximum Control Signal: 20mA
- Maximum Current Rating:
- Switching: 6A
- Dimming Control: 20mA
- Dimensions: 50 × 23 × 42 mm
- Net Weight: 48 g
- Gross Weight: 50 g
- Terminal (Live):
- Diameter: 3.2 mm
- Capacity: 3 × 1.5 mm²
- Installation: Indoor use only
- Compliance: BS EN 60669-2-1
- Commodity Code: 85365007
Installation & Safety Guidance
- Use screened 2-core cable for the 1–10V control signal
- Earth the screen at one end only
- Do not connect the 1–10V terminals to mains voltage
- Ensure LED driver or ballast control input does not exceed 20mA
- Verify inrush current does not exceed 6A
- Fit inrush current limiters where required
- Maximum one dimmer per circuit
Incorrect installation or overloading may damage the module and invalidate the guarantee.
Guarantee Information
The Varilight MFP1M1 is covered by a 10-year manufacturer’s guarantee, valid when installed correctly and used within rated limits.
- Guarantee Registration Number: F006 / F007
- Manufacturer: Doyle & Tratt Products Ltd, Horsham, West Sussex, UK
